Centre nut spanner

[D_G]

I think the pixies have been in my garage and my centre wheel spanner is no where to be seen, so have any of you guys got a spare one I could have in exchange for some beer tokens?

Cheers

Dave

[snuffy]

Spare !! Spare !! You'll be lucky - those things are rarer than a rare thing that's very rare.

I got mine of ebay - that might be worth a try. Just make sure you get the right size, as there are two ( well, I know there is at least one wrong size as I bought a wrong one to start with ).

[D_G]

Had a look on the bay but the only ones are the wrong size. Was hoping someone on here has a spare.

Dave

[mgbond]

I do have two, however i did a very nice exchange with Steve Obes for a Matt Faulks IC

Steve, its on my table and will bring it on the next meet.

Bondy

[R0162]

mgbond said:

I do have two, however i did a very nice exchange with Steve Obes for a Matt Faulks IC

Steve, its on my table and will bring it on the next meet.

Bondy

you got an intercooler in exchange for a big plastic spanner?

[andygtt]

I have the spanner and sold the wheels to Tuxman the other day so I guess mine is surplus now

[mgbond]

R0162 said:

you got an intercooler in exchange for a big plastic spanner?

Yep

[D_G]

andygtt said:

I have the spanner and sold the wheels to Tuxman the other day so I guess mine is surplus now

I'll have it off you if that's OK

Dave

[Haydn W]

If anyone still needs a wheel centre nut spanner Christopher Neil has brand new ones, I've just had one, although Paul in stores said they took some locating,be quick !
Hope this helps.

[TuxMan]

[quote=andygtt]I have the spanner and sold the wheels to Tuxman the other day so I guess mine is surplus now [/quote


No you still owe me the spanner ;-)

If I get some Made in carbon would anyone be interested ?? Tux

[snuffy]

Haydn W said:

If anyone still needs a wheel centre nut spanner Christopher Neil has brand new ones, I've just had one, although Paul in stores said they took some locating,be quick !
Hope this helps.

Chris Neil had to cut a couple of my nuts off late last year !! A PHer on here kindly posted me a couple he no longer needed to replace them. So now I keep them clean and greased.

One thing I've done is remove the anodising on them so they are raw ally now. They look much better, i.e. less Saxo.

[R0162]

Same here mine should be ready anyday with the polished aluminium finish.

[SimonJW]

TuxMan said:

If I get some Made in carbon would anyone be interested ?? Tux

Price dependant mate. Anything that is more robust than the one I have will do as it bends under the strain of trying to remove the nuts every time. Awful bit of kit.

[D_G]

Needed to take off my wheels this weekend and has reminded me about this....anyone got a spare? Tried ebay etc but no 60mm types around at the mo..

Cheers

Dave

[DeanoM12]

D_G said:

Needed to take off my wheels this weekend and has reminded me about this....anyone got a spare? Tried ebay etc but no 60mm types around at the mo..

Cheers

Dave

If you need to borrow mine, then just give me a shout mate

[D_G]

Thanks mate, I can get them off OK at home with grips and rubber pads, it would make it a bit easier with a spanner though. Also I want a spanner to carry around in the car. See you soon, maybe the Awards do in Feb?

Cheers

Dave

[ACROWE]

I have a spare one too.

[D_G]

Hi Andy,

Do you want to swop for some beer tokens?

Cheers

Dave

[dave sutton]

D_G said:

Thanks mate, I can get them off OK at home with grips and rubber pads, it would make it a bit easier with a spanner though. Also I want a spanner to carry around in the car. See you soon, maybe the Awards do in Feb?

Cheers

Dave

I got a metal 60mm box spanner off Amazon for about £23 and to remove one of the nuts I needed a 1m tommy bar, would no doubt have written off a plastic one.

[ACROWE]

D_G said:

Hi Andy,

Do you want to swop for some beer tokens?

Cheers

Dave

Fine by me. Where abouts in the country are you?