quick car query tyre sizes different
Discussion
255 35 18. 255mm wide, the actual width of the tread. 35, the height of the sidewall as a percentage - 35% of 255mm. 18, the diameter of the wheel its fitted to, in this case 18 inches.
Yep a mixture of metric, percentages and imperial measurements!
The differing profiles (35 above) are to maintain the circumference of the four wheels/tyres to a similar value. This is especially important to 4wd vehicles, but also helps simplify abs/tc callibration.
There's also the issue of the higher the profile the more compliant (generally speaking) the tyre is, which may help in acheiving the required ride and handling dynamics of the car.
Yep a mixture of metric, percentages and imperial measurements!
The differing profiles (35 above) are to maintain the circumference of the four wheels/tyres to a similar value. This is especially important to 4wd vehicles, but also helps simplify abs/tc callibration.
There's also the issue of the higher the profile the more compliant (generally speaking) the tyre is, which may help in acheiving the required ride and handling dynamics of the car.
j4ckos mate said:
but why the higher tyre wall profile on the fron and not the rear
To maintain the right height of side wall.Edited by j4ckos mate on Saturday 16th April 09:40
The profile has to drop for wider rear tyres, to keep the sidewall height (mm) the same. If not you end up with a car that looks like a dragster.
Look up tyre sizes for some thing like a countach, you will see the same effect because if the wide rears.
Edit...there you go Lambo sizes
F 205/50 VR 15
R 345/35 VR 15
Edited by 98elise on Saturday 16th April 10:33
Edited by 98elise on Saturday 16th April 10:35
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


