Pedal box cable help please
Pedal box cable help please
Author
Discussion

blackiepaul

Original Poster:

1,973 posts

217 months

Saturday 16th April 2011
quotequote all
Hi all,

There are two cables that connect onto the brake light switch on the Sagaris / T350 pedal box. One is dark green and one is light green, they have three spades that they can fit onto.

I either have no brake lights or I have them on all the time depending on which combination I use. I know this is a real real pain but if some one does not know can some one take a look with a torch and see if they can see which ones go where.

I hope someone can help.

Paul......

VARLEYHYD

2,244 posts

230 months

Saturday 16th April 2011
quotequote all
Very top light green/ grey

Bottom dark green/brown

Upper middle not used.

Have spare if you need one

G

L33

3,469 posts

247 months

Saturday 16th April 2011
quotequote all
I'm in Sutton Coldfield if you need a look at the wiring on mine bud.
thumbup

blackiepaul

Original Poster:

1,973 posts

217 months

Saturday 16th April 2011
quotequote all
Hi G,

Thanks for your response. Just tried it, it was the middle one that I was wondering if used or not. Either way around using the top or bottom ones and it still does not work.

Is there anything else that it could be? I know the cable was disconnected at some stage over the last week so it seems too much of a coincidence for it to be that it has just packed up?

Paul........


VARLEYHYD said:
Very top light green/ grey

Bottom dark green/brown

Upper middle not used.

Have spare if you need one

G

blackiepaul

Original Poster:

1,973 posts

217 months

Saturday 16th April 2011
quotequote all
L33 said:
I'm in Sutton Coldfield if you need a look at the wiring on mine bud.
thumbup
Hi Lee, thanks for the offer - this is a total mystery to me this one. As said on the reply above it has just happened after it must have been taken off which is strange. I will have another look in the morning.

Hope the three of you are well. Paul.......

VARLEYHYD

2,244 posts

230 months

Saturday 16th April 2011
quotequote all
The switch is a fail safe, n/c contact

So if the switch has moved away from the bellcrank that it should be depress by when brakes are not applied the lamps will be permantly on

G

fairclp

654 posts

269 months

Saturday 16th April 2011
quotequote all
Have a spare switch. Will bring to meet tomorrow if you want or drop off to yours.

blackiepaul

Original Poster:

1,973 posts

217 months

Sunday 17th April 2011
quotequote all
fairclp said:
Have a spare switch. Will bring to meet tomorrow if you want or drop off to yours.
HI Paul,

I will give you a call or a text, can you take it with you incase I come and get it from there if not I i will come and get it from yours or you can pop around mine. I am in no real rush but it would be nice to know it is right.

Thanks all.

Paul.......

blackiepaul

Original Poster:

1,973 posts

217 months

Sunday 17th April 2011
quotequote all
Hello all,

I have been around to Pauls (fairclp) this afternoon and picked up his spare switch. It worked a treat when I plugged it into mine - thought all was good.

I then took my old one off and thought I would plug it in and..... it worked.

Something must have moved on the pedal box as the adjustment was not right meaning it did not work. My neck is killing me from looking under there so I will wait for a bit and then go and fit it back up and adjust away.

Thanks for you help Paul as well as the other offers.

Paul......