Helpful mechanic required in Shropshire
Discussion
I sheared a wheel bolt using a torque wrench at the weekend. The bolt is inaccessible from either side of the hub. Grrr...
Can anyone recommend a good trad mechanic in Shropshire (ideally Shrewsbury/Telford) who could have a go at removing the bolt?. I've tried a tyre fitting place and they sadly can do nothing.
Can anyone recommend a good trad mechanic in Shropshire (ideally Shrewsbury/Telford) who could have a go at removing the bolt?. I've tried a tyre fitting place and they sadly can do nothing.
Have you got a pic, I'm struggling to see how it can be inaccessible from the front face of the hub.
I managed to shear one off flush some years ago and we got it out easily by drilling and using an extractor.
If you can't find anyone to do it in-situ it might be worth whipping the hub off and taking it to your local machine shop for them to drill it out.
I managed to shear one off flush some years ago and we got it out easily by drilling and using an extractor.
If you can't find anyone to do it in-situ it might be worth whipping the hub off and taking it to your local machine shop for them to drill it out.
It's accessible, inasmuch as it is visible, but there is nothing to grip. My first thought was to drill a pilot hole and use an easyout, but I am struggling to find someone to do this for me. I'd have a go myself, except I'd need to purchase a suitably small extractor and cobalt bit, plus I'm busy with other things at the moment.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


