Cooling any suggestions??
Cooling any suggestions??
Author
Discussion

neal1980

Original Poster:

2,584 posts

263 months

Friday 6th May 2011
quotequote all

Ive got a TVR with a twin Turbo Rover V8 engine in. Its fitted with a front mount intercooler with an alloy rad up against this with 2 SPAL puller fans on.

When its idleing it cant maintain the temperature and very slowly keeps upping towards 95-100 degrees. I have a 74degree stat in there and uprated spal fans that shift 2000m3/hr X 2 much improved over the originals. These new fans sound noticably more powerful but didnt help. The bonnet also has vents.

Any ideas Im right in assuming that when approaching 95 degrees the fans should be pulling this down. The radiator is alloy one but smaller than the original. Also on the original waterpump.

Any ideas??

garagewidow

1,502 posts

194 months

Friday 6th May 2011
quotequote all
are the fans shrouded?if not they may be just cycling the hot air back through the rad matrix as the intercooler is in front of it preventing cooler air from reaching the rad,you can test with smoke to see how the air is flowing.

neal1980

Original Poster:

2,584 posts

263 months

Saturday 7th May 2011
quotequote all
No the fans are not shrouded, they cover most of the surface area of the radiator already. Is it worth me covering up the few inches either side and around the fans??

Thanks

stevieturbo

17,987 posts

271 months

Saturday 7th May 2011
quotequote all
neal1980 said:
No the fans are not shrouded, they cover most of the surface area of the radiator already. Is it worth me covering up the few inches either side and around the fans??

Thanks
If they cover most of the core and can only draw air through the core that's fairly good. Make sure they are tight to the core though

And make sure the only air that can pass through the radiator at any time, is cold air. Ensure the radiator is totally sealed so no hot air can get re-circulated.

spend

12,581 posts

275 months

Monday 9th May 2011
quotequote all
Measure temps in/out the rad with a laser thermometer to see what is going on.

Does fast idle make a difference?