Bike carcoon bubble review
Discussion
moanthebairns said:
Bubbles 
Bubbles bubbles bubbles my bubbles!!!!
http://www.youtube.com/watch?v=s7IYR_rELyE
Latty666 said:
Don't use the bike for months at a time , dust isn't an issue as I use a cover but don't want hidden corrosion or moisture to set in , my garage is dry but isn't heated
Unless your bike is are made of cheese I can't see you'd need one, to be frank. Some of our bikes are 90 years old and made entirely of metal and they've never been near anything so fancy. In fact I suspect that some lived outside for years.
Personally if I were you I'd treat it with ACF or something, park it up and if worried, check it every couple of months but it'll be fine.
peteO said:
it does seem a tad dramatic... "constant airflow and correct humidity" 
It does doesnt it...but my Suzuki's are the same age and mileage when I bought them, the Busa is totally untarnished, the SRAD is in places, tatty, due purely down to the way they ad been stored, the Busa being in a climate controlled building, the SRAD in a chaps garage with no helping hand of any protective coating.
Both these 2 Yamahs are similar ages, the RD500 has done no mileage ...the 125 is my friends, he keeps all his bikes in a carcoon.
podman said:
PS..The 500 wasnt left outside, just sat in a poorly ventilated shed...
They must be s
t in the first place then, to be blunt!By that I mean the finish and materials. I know vintage bikes that have been left in rickety old wooden sheds since the 60s and they're fine. My Morini that I painted by hand in ~94 and was just bunged in a wooden shed until this summer is fine. Even the untreated alloy bits like hubs, engine casings etc. and fifties Italian vehicles aren't renowned for being all that durable!
I reckon that if that's as durable as Japanese stuff is they're gonna be rarer than our 1920s Brit stuff within a decade

I can't speak for the old Brit stuff, but it depends if you are happy with 'Patina' or want box fresh and zero deterioration.
When I was using carcoons, the main issue was a blackish dust that was being kicked up in storage from wind/airflow. Moisture was less of an issue. I don't use them now as I have a heated, dry, carpeted garage that is part of the house. I just use dust sheets, but the dust still migrates upwards with wind under the garage door, although the garage is super dry as a result of the good airflow.
Perhaps I'm biased as I used to sell Carcoons at my God Dad's classic car garage in the 90s as a student, but it was one of those products you could sell and stand 100% behind, in spite of the high price.
When I was using carcoons, the main issue was a blackish dust that was being kicked up in storage from wind/airflow. Moisture was less of an issue. I don't use them now as I have a heated, dry, carpeted garage that is part of the house. I just use dust sheets, but the dust still migrates upwards with wind under the garage door, although the garage is super dry as a result of the good airflow.
Perhaps I'm biased as I used to sell Carcoons at my God Dad's classic car garage in the 90s as a student, but it was one of those products you could sell and stand 100% behind, in spite of the high price.
sure, you'll get people saying there's no need it's over kill, why bother, but it all depends on the environment... I had a lock up garage, it was about 70 years old, it look like it would be a damp old hole, but my old classic car sat in there for 3 years and never suffered from damp... I would of been one of the doubters... but I moved to a new house, nice reasonably recent brick built garage, dry and no damp to be seen... within 2 weeks the same car started to get small mold spots all through the interior... Did loads of research, eventually installed a dehumidifier and it sorted it, quickly... 10 years later dehumidifier went down for 3 weeks, damp and mold was back... The dehumidifier works!
Heat doesn't matter, it's airflow and humidity... if you're lucky enough to have a garage that naturally deals with it, then good for you, if not then do some research and come up with a solution...
Carcoons work! but if you don't need one, there's no point...
Heat doesn't matter, it's airflow and humidity... if you're lucky enough to have a garage that naturally deals with it, then good for you, if not then do some research and come up with a solution...
Carcoons work! but if you don't need one, there's no point...
3DP said:
I can't speak for the old Brit stuff, but it depends if you are happy with 'Patina' or want box fresh and zero deterioration.
That's a good point actually. Most British bike enthusiasts tend to want their bikes to look a little 'used'. Most later bike restorations (Japanese stuff) is restored to look like it's never been used. That's not a dig, but something I'd not really thought of before.
I wonder if it's partly because you can still get NOS parts for most Japanese bikes, where obviously you can't for Brit stuff so it tends to be repaired and restored as oposed replaced?
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff






