PH Origins: Electronic parking brakes


Electromechanical parking brakes offer numerous benefits - which is why, over the past several years, the number of cars fitted with them has increased dramatically.

For starters, an electronic parking brake only requires a button in the cabin. This gives the designers far more freedom, when it comes to interior design and layout, and frees up a little space. EPBs also grant a range of assistance functions, such as an auto-hold feature for automatically engaging the parking brake when stopping on hills or crawling in traffic.

Because most set-ups use actuators mounted directly to the rear brakes, no parking brake lever, pedal or connecting cables are required; this makes it easier and quicker for the manufacturer to build the car. Compared to drum-in-hat parking brake set-ups, they can also end up being lighter - granting minor emissions, economy and handling benefits.


Simplicity and safety, that said, has always been one of the key motivations behind the concept of EPBs. A system that can automatically engage a parking brake when a car's door is opened, for example, could prevent an owner having to watch their pride and joy take a short journey into a neighbouring garden.

Additionally, an EPB can automatically stop a car from rolling backwards when stopped on a slope or attempting to set off - saving an inattentive driver from an unwanted bump, or protecting a distracted driver from an incident. It was this type of event that prompted one such early concept of an automatic parking brake, with inventor Sol Seidman - based in Beverly Hills - filing a patent for 'Motor Vehicle Control' in 1927.

The idea of an automatic braking system itself wasn't new, with patents for emergency train carriage brakes dating back to the late 1800s, but Seidman's was seemingly the first to directly reference an automotive application. His patent described many mechanical revisions to make driving easier, including a system that would automatically operate the parking brake when required. Similar ideas followed, all being based on the concept of preventing unintentional rollback and making driving easier.


The Chrysler Corporation, in 1940, was also looking at ways of automatically applying the parking brake - but, primarily, as a means to stop vehicles with automatic transmissions creeping forwards when in drive. The anti-rollback function hadn't been overlooked, however, and was listed as a prominent secondary benefit. Many of these arrangements often relied on complex vacuum or hydraulic arrangements, restricting their viability.

Advances were made when, in 1955, engineer Robert Hays proposed a more straightforward, effective and electronically operated set-up. The proposed system could monitor the vehicle's current speed, thanks to conductive elements in its speedometer, and - when the car came to a rest - an electric motor would be engaged that would actuate the vehicle's rear drums.

This set-up would become the basis of virtually all future EPB designs, with all either electrically acting on existing parking brake components or making use of motor-on-caliper configurations to clamp pads to discs.


In the late 1980s, simple driver-actuated EPBs were reputedly used in industrial applications, with electronically triggered valves locking pressure in the brake lines - like a line-lock - and holding the vehicle still. Mazda was experimenting with an improved EPB in the early 1980s, too, which was automatic and featured a gradient sensor to improve its effectiveness. The patent for this particular configuration would go on to be referenced by countless other manufacturers in the following decades - including Volkswagen and BMW.

Unsurprisingly, it was the launch of a new flagship model that heralded the introduction of EPBs to the mainstream automotive market. The E65-generation 7 Series, revealed in September 2001 and introduced on 1 November 2001, was packed with equipment - including a Siemens-built cable-actuating EPB, active anti-roll bars and a direct-injection V12.

It was a close-run thing, though; TRW Automotive had been busy developing an EPB system, which featured a more advanced motor-on-caliper arrangement. It almost pipped the BMW to the market, too, finding its way into the flagship Lancia Thesis.


Unfortunately, despite being previewed in February 2001, complete details of the Thesis's hardware were not published until its full reveal on 6 November 2001. It was continually delayed, furthermore, and didn't reach the market until June 2002.

Regardless, the TRW set-up went on to be hugely successful - finding a home in myriad models, ranging from the Jeep Renegade through to the BMW i8. Now, more than 100 million are claimed to be in service. Their remit continues to be extended, too; recent developments include integration with cross-path reversing safety systems, preventing an accident if someone walks behind a reversing vehicle.

While it's hard to beat the instant on/off identification, and quick, easy action of a mechanical parking brake, ever-increasing safety requirements, automation and the demands of most customers means that EPBs will continue to rise in number.

 

 


P.H. O'meter

Join the PH rating wars with your marks out of 10 for the article (Your ratings will be shown in your profile if you have one!)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Rate this article

Comments (106) Join the discussion on the forum

  • McGraw 23 Apr 2018

    Had to have a new bumper on my car recently.

    For some reason Audi A3s only engage the full parking brake automatically after the key has been removed when hill hold assist is engaged.

    The light also goes out pretty quickly. We'd been sat in the car chatting for a while then got out...car wasn't moving.

    I had temporarily turned off hill hold assist then turned it back on (or so I thought - the button doesn't always work). Parked the car and left it outside. Went back out to it and went in the boot..closing the boot caused it to roll off as the handbrake wasn't on after all.

    Looked out of the window and it was in the middle of the road having bounced off next door's brick gatepost.

    Pretty annoying as I could have sworn I'd checked that the handbrake came on when the key was out. I may not have been pushing hard enough.


  • leakymanifold 23 Apr 2018

    I had an original mini in my youth. Handbrake turns were epic fun in that thing....not sure it would have felt any bigger either having an electric handbrake instead of a lever.

  • CaptainRAVE 23 Apr 2018

    The problem comes when you move from a car where the parking brake is entirely automated to a manual parking brake again.

    Moving my wifes car in the snow and wondering why it wasn't moving much. It was only the next day when I went to drive it that I remembered the lack of automated parking brake...oops!

  • cptsideways 23 Apr 2018

    If only all the manufacturers shared the same set ups, some are automated, some are not, some auto release some do not, some only when belted up. Some come on with the key out other do not. It can vary within one manufacturers range too. Some buttons are up, some down, some by your knee most in the centre console.

    For what was a standard simple an idiot proof they have made things rather complicated. However as a rule applying the handbrake & holding it on whilst moving does do a nice emergency stop using all the all brakes still stationary.

  • HardMiles 23 Apr 2018

    Good article, but I keep seeing the same sentence in all of them; “being used in myriad models” for example.

    Either my understanding of the English language is wrong, but that should read; “being used in a myriad of models”, am I correct?

    Please help as it’s now bothering me!

View all comments in the forums Make a comment