The Wedge Sausage Meet
Discussion
Great line up of TVR's this morning...Impressive turnout..Great to see another new face..Who just so happens to drive a very noisy Chim...
Had a job trying to squeeze them all in the one pic due to too many euro boxes opposite....Next time if there is that many then plan B pic will be applied...
Cheers
Ziga
Had a job trying to squeeze them all in the one pic due to too many euro boxes opposite....Next time if there is that many then plan B pic will be applied...
Cheers
Ziga
Hi Peeps
Good meet this morning at the royal park...3 x Chim 500's and a 430BV..sounded nice when you all left...
Good to see Mr & Mrs K...im sure that blue 400SE is made from cake...
Wendy was still a bit poorly even though she looked like she had perked up bit...Bless.
Nice to meet another new face...Norman in the yellow 500...
Cheers
Ziga
Good meet this morning at the royal park...3 x Chim 500's and a 430BV..sounded nice when you all left...
Good to see Mr & Mrs K...im sure that blue 400SE is made from cake...
Wendy was still a bit poorly even though she looked like she had perked up bit...Bless.
Nice to meet another new face...Norman in the yellow 500...
Cheers
Ziga
billynobrakes said:
We could have a ritual burning of Wendy, Poppy and I could bring along a photo of the Gredge to throw on the pyre. No seriuolsy there can,t be much wrong with Wendy as it sounds electrical to me, not sure about that knocking noise on Poppy though , I will be in the 450 as all the little niggles are getting done sorted out the blanking plug where the gems sensor used to be with the help of Number 7, while he was doing that I was centralising up the rear hood, hoop and one of the screws was not fully out so it cut threw the lovely new leather on the hoop I am fecking but ha ho my fought just another interior job for over the winter
I think its just ...or rather hoping that its just a sticky lifter, it does clear after a couple of minutes and has only just started to happen...I will put some Wynn's hydraulic valve treatment in and then in the next few weeks changed the oil & filter and also flush the old oil out, its done every year since I have owned it..It was a bit disconcerting though to hear it...
https://www.google.co.uk/url?sa=t&rct=j&q=...
Hopefully nothing has come loose or unseated...Still have good power so don't think its cam...There is some hunting on initial start up which clears but have no air leaks...Probably getting a bit tired, its pushing 86,000 miles now.....I have a spare known good working ECU and a newish coil for Stew to try..Hopefully it will be sorted soon as there is nothing worst than a poorly Wedge...
Ziga
Gassing Station | Wedges | Top of Page | What's New | My Stuff