Discussion
1BigBadWedger said:
You can buy the TVR rocker covers off me then, if you like?! They changed them to standard Rover v8 covers with the rebuild so I don't need them anymore............
Nick I think most/all 450s were fitted with these rocker covers, why did they not replace them after the rebuild?This photo shows your 450 some considerable time ago when it was owned by Glen Baker.
BadRed said:
1BigBadWedger said:
You can buy the TVR rocker covers off me then, if you like?! They changed them to standard Rover v8 covers with the rebuild so I don't need them anymore............
Nick I think most/all 450s were fitted with these rocker covers, why did they not replace them after the rebuild?This photo shows your 450 some considerable time ago when it was owned by Glen Baker.
This.
Those rocker covers would have been very rare original equipment.
1BigBadWedger said:
BadRed said:
They're aftermarket covers from what I've been told.Trust us anoraks, we know what we're talking about!!!
They were only fitted to the rarest of TVR's at the factory back in the early 90's.
450SE's
Griffith 430's
Chimaera 430's
Here's my old 450SE...
Here's my old Chimaera 430......
1BigBadWedger said:
It's been seen by lots of experts and no ones ever said anything about the gauge being a problem.
http://www.demon-tweeks.co.uk/performance/gauges/fse-in-line-fuel-pressure-gaugeExperts !! I fitted it when it was being set up, I removed the warning sticker (which was stuck on the glass) which said it should only be used for setting up the system. When I sold the car it was in the glove box. fuel spraying around the engine bay wont be fun.
Gassing Station | Wedges | Top of Page | What's New | My Stuff