Sprintex Inlet Temperature

Sprintex Inlet Temperature

Author
Discussion

chapperssx

Original Poster:

753 posts

173 months

Friday 14th June 2013
quotequote all
Adam,OZ2, guys have you measured your inlet temps and if you have can you tell me how high or low they are ?

chapperssx

Original Poster:

753 posts

173 months

Friday 14th June 2013
quotequote all
Thanks for the info guys, the reason i asked is because in WOT the inlet temp climbs to 107 degress!! So i will have to find a way of bringing the temperature back down to an acceptable level....I've not decided on which route i will take yet but will keep you posted....But i'm not sure if it will be done before the Fest...

chapperssx

Original Poster:

753 posts

173 months

Friday 14th June 2013
quotequote all
It is measured from the pipe work that leads to the silicone spacer that joins the plenum chamber, the pipe work has a temperature sensor fitted for the ecu !!

chapperssx

Original Poster:

753 posts

173 months

Friday 14th June 2013
quotequote all
Hi Adam i've been reading through some data on the Sprintex, the artical was very interesting !! It said the measured temperture inside the sprintex unite when running at max rev it sucks near as dam it 500 cubic foot of air per minute and at max revs inside the compressor the temperture reaches 140°c !!!