Discussion
Any advice on taking the plenum off (hopefully this sunday)?
Other than the allen bolts it looks like i'll need to separate the throttle, but there are two or three places it appears i could make that separation - any clue which is going to cause the least problems?
There was a website a while ago with some good info but it has disappeared!
Cheers
Other than the allen bolts it looks like i'll need to separate the throttle, but there are two or three places it appears i could make that separation - any clue which is going to cause the least problems?
There was a website a while ago with some good info but it has disappeared!
Cheers
That was pretty easy wasn't it. I undid the nut on the linkage for the throttle assembly, easy. Two hoses on the bottom for the hot spot were a bit of a nightmare, but it's free now.
Thanks john I'll give that a read. Lots of black goo around my trumpets and crud caked onto the issue of the hose from the flame trap so I'm sure there's loads more to do.
Thanks john I'll give that a read. Lots of black goo around my trumpets and crud caked onto the issue of the hose from the flame trap so I'm sure there's loads more to do.
Gassing Station | Wedges | Top of Page | What's New | My Stuff