Bulkhead wiring loom
Discussion
The interior of my 350i has been stripped out for many years. However lock down gave some time to refurbish. New foam and carpets replaced, wood back from Chapman & Cliff. Time for dash to go back in. Installed the heater box. The loom running from passenger side to drivers, in the middle seems to lie on the back of the heater box? Questions is at passenger side is it fastened / held up against the bulkhead at any point as its quite a weight?
Thanks for getting back to me
On the drivers side the loom rests on top of the steering column bracket. Its more the passenger side where a number of fairly bulky looms come together.
I suppose the question was does anyone know where it would have been originally hung / supported from?
On the drivers side the loom rests on top of the steering column bracket. Its more the passenger side where a number of fairly bulky looms come together.
I suppose the question was does anyone know where it would have been originally hung / supported from?
Thanks to you both
Will take a closer look at the weekend
Whilst on the subject or wiring, I have been checking the wires that go through the A post into the door. There are connectors for the mirror, plus the window motor, but in addition about 4-5 wires, heavier duty ending in a female Molex connector, with nothing it seems to attach them to?
Will take a closer look at the weekend
Whilst on the subject or wiring, I have been checking the wires that go through the A post into the door. There are connectors for the mirror, plus the window motor, but in addition about 4-5 wires, heavier duty ending in a female Molex connector, with nothing it seems to attach them to?
Gassing Station | Wedges | Top of Page | What's New | My Stuff