Clutch anyone?
Discussion
Well, the time has come to think about a clutch change as I notice a bit of slippage in 4th gear on Sundays TVR club run.
Wheres the best place to buy a clutch from please guys? Or does anyone have one knocking round in exchange for beer tokens?
Do I want a standard Rover SD1 clutch for a 3.5 litre V8 OR an early griff 500 clutch? Whats the difference? I am guessing just the "springiness" of the coverplate which will be felt through the clutch pedal being heavier?
What are your experiences and what places you have found for the best prices on a parts basis only please?
I am guessing I need to replace clutch, cover plate and release bearing?
Cheers,
L33.
Wheres the best place to buy a clutch from please guys? Or does anyone have one knocking round in exchange for beer tokens?
Do I want a standard Rover SD1 clutch for a 3.5 litre V8 OR an early griff 500 clutch? Whats the difference? I am guessing just the "springiness" of the coverplate which will be felt through the clutch pedal being heavier?
What are your experiences and what places you have found for the best prices on a parts basis only please?
I am guessing I need to replace clutch, cover plate and release bearing?
Cheers,
L33.
Edited by L33 on Tuesday 11th September 10:45
rev-erend said:
After all the boasting going on after the rolling road at BBWF .. think you better get a twin plate race clutch..
Seriously - get a Griff 500 clutch. You are probably looking at 300 quid and a whole weekend to fit it (yourself) or 12 ~ 14 hrs labour at a garage.
You got me mistaken Rev. It wasn't me who was 270.4Seriously - get a Griff 500 clutch. You are probably looking at 300 quid and a whole weekend to fit it (yourself) or 12 ~ 14 hrs labour at a garage.
My figures were just shy of 250bhp - which is about right for a 400se.
[quote=TVRleigh(BBWR)]There is a company on ebay advertising a griff 500 clutch on ebay for £109. + shipping.
http://cgi.ebay.co.uk/TVR-CHIMAERA-GRIFFITH-5-0-V8...
may want to check it's for your gearbox.
[/quote]
Thatnks Leigh - I already have them on the case looking for me.
http://cgi.ebay.co.uk/TVR-CHIMAERA-GRIFFITH-5-0-V8...
may want to check it's for your gearbox.
[/quote]
Thatnks Leigh - I already have them on the case looking for me.
Its Done!!!!!
I got an uprated Griffith 500 clutch here for a very reasonable £125 ALL in:
http://cgi.ebay.co.uk/TVR-CHIMAERA-GRIFFITH-5-0-V8...
The clutch that I got was actually a Borg & Beck jobbie which a certain TVR parts place wanted more than double this price!
As for the fitting, I toyed with doing it myself until I realised it was an engine out job
I was gutted when I was getting quotes of between 10 - 14 hours labour at about £45 per hour.
Blaine recommended "TopGear Automotive" in Wolverhampton to me:
http://www.topgearautomotive.co.uk/
They said they can do it without removing the engine - 5 hours labour at £37.50 per hour! The 2 guys that run the place used to work for TVR Team Central in Birmingham so they know the wedges very well. I took it in this morning and vas delighted with the level of service and final bill of just £190 to fit.
Whats even better was I work just up the road and they droped me off to work and collected me when the job was done.
Whats it like?
Well, to drive, its a different car. The clutch is so much more responsive and it feels a lot sharper now the timings all set up correctly and the exhaust is not properly seated (no extra charge for doing this).
So, purpose of this post is a big huge recommendation to the guys at TopGear Automotive for a job very well done. Cheeply.
I got an uprated Griffith 500 clutch here for a very reasonable £125 ALL in:
http://cgi.ebay.co.uk/TVR-CHIMAERA-GRIFFITH-5-0-V8...
The clutch that I got was actually a Borg & Beck jobbie which a certain TVR parts place wanted more than double this price!
As for the fitting, I toyed with doing it myself until I realised it was an engine out job
I was gutted when I was getting quotes of between 10 - 14 hours labour at about £45 per hour.
Blaine recommended "TopGear Automotive" in Wolverhampton to me:
http://www.topgearautomotive.co.uk/
They said they can do it without removing the engine - 5 hours labour at £37.50 per hour! The 2 guys that run the place used to work for TVR Team Central in Birmingham so they know the wedges very well. I took it in this morning and vas delighted with the level of service and final bill of just £190 to fit.
Whats even better was I work just up the road and they droped me off to work and collected me when the job was done.
Whats it like?
Well, to drive, its a different car. The clutch is so much more responsive and it feels a lot sharper now the timings all set up correctly and the exhaust is not properly seated (no extra charge for doing this).
So, purpose of this post is a big huge recommendation to the guys at TopGear Automotive for a job very well done. Cheeply.
Edited by L33 on Friday 12th October 21:46
TVRleigh_BBWR said:
Hi Lee, so the eBay Item was fine then, as some people was sceptical.
How did they cut the cross member to replace it of just move the Gearbox and engine far enough apart to get there hands in.
Leigh
No cutting of cross members here!!!How did they cut the cross member to replace it of just move the Gearbox and engine far enough apart to get there hands in.
Leigh
basically, propshaft and exhaust removed then engine and bell housing slpit and seperated just far enough to change the clutch.
Cutting of the cross member is not recommended - especially as you can't get to the top portion of it to weld it back up again when you have done your bodge job!
No - nothing said at all about the ebay clutch.
It is a "borg & Beck" clutch - excellent quality. 'Nuff said
I am told these people on ebay supply TVR car parts and you can look for yourself what they charge for the same clutch!
This is the website for the ebay seller:
http://www.techniclutch.com/
It is a "borg & Beck" clutch - excellent quality. 'Nuff said
I am told these people on ebay supply TVR car parts and you can look for yourself what they charge for the same clutch!
This is the website for the ebay seller:
http://www.techniclutch.com/
adam quantrill said:
How can you way that about someone who drives a pickup truck across the channel to invade France? ;^)
So - L33 - when ordering your clutch presumably you ignored the eBay ad and just emailed them or rang them up?
No, I won the auction on ebay. I did ask for an off ebay price and they wanted £150 - hence sticking with the ebay route. Look at the hostory - the griff 500 clutches they list rarely sell.So - L33 - when ordering your clutch presumably you ignored the eBay ad and just emailed them or rang them up?
Gassing Station | Wedges | Top of Page | What's New | My Stuff