ST200 Airbag Light
Discussion
Got it sorted, under the passenger seat a yellow loom had been repaired, read bodged, before. Looks as if it had caught up in the runners and broken, had been soldered, good job, but had not had heat shrink used on the joints, basically the insulation tape had split/ torn allowing the 2 wired to touch, hence the light flashing.
Re cut, re-soldered using h/duty Raychem (Aviation quality) heat shrink, over the soldered joints, and over the whole repair, proper job!
I would recommend dis-connecting the battery, and waiting 1/4 hr or so, before doing any A/ bag investigations,
Thanks to every-one who offered help,
Cheers,
Fab.
Re cut, re-soldered using h/duty Raychem (Aviation quality) heat shrink, over the soldered joints, and over the whole repair, proper job!
I would recommend dis-connecting the battery, and waiting 1/4 hr or so, before doing any A/ bag investigations,
Thanks to every-one who offered help,
Cheers,
Fab.
Edited by fabricator on Saturday 28th July 00:44
Gassing Station | Ford | Top of Page | What's New | My Stuff