What Grit Sandpaper for rubbing down between coats?
Discussion
I'm currently in the process of respraying a few plastic parts off the car (wing mirrors, lower bumper grille, etc) in Satin Black.
I have rubbed down the parts with 600 grit wet + dry and applied 4 coats of Red Oxide Primer.
Onto the next stage of applying the Satin Black, I was thinking that 4 thin coats will be sufficient coverage. But what Grit wet + dry should I use in between coats? Will 1200 be to coarse? or should I go as far as 2000 grit?
Its my first attempt at respraying so most of it is done using common sense and some internet research.
After turning my utility room into a temporary spray booth and nailing a clothes hanger to the wall:
After being rubbed down ready for firtst coat: (sorry for crappy phone pics)
After one coat:
And finally after 4 coats:
Cheers
I have rubbed down the parts with 600 grit wet + dry and applied 4 coats of Red Oxide Primer.
Onto the next stage of applying the Satin Black, I was thinking that 4 thin coats will be sufficient coverage. But what Grit wet + dry should I use in between coats? Will 1200 be to coarse? or should I go as far as 2000 grit?
Its my first attempt at respraying so most of it is done using common sense and some internet research.
After turning my utility room into a temporary spray booth and nailing a clothes hanger to the wall:
After being rubbed down ready for firtst coat: (sorry for crappy phone pics)
After one coat:
And finally after 4 coats:
Cheers
Gassing Station | Bodywork & Detailing | Top of Page | What's New | My Stuff