Raceproved Preoiler
Discussion
I wonder if there are many of you out there having the raceproved preoiler installed.
Does anyone ever unplugged the hose from the cam cover and then started ?
I have, and --> nothing !! No oil is getting pumped at all !
Then took off the hose that goes to the filter and no oil, too. So i think the pump is dead.
It is an Jabsco/Flojet Triplex diaphragma pump type. The max. working temperature of these pumps is 60 degrees C ! So no wonder the pump went...
Maybe take a look at yours.
Thomas
Does anyone ever unplugged the hose from the cam cover and then started ?
I have, and --> nothing !! No oil is getting pumped at all !
Then took off the hose that goes to the filter and no oil, too. So i think the pump is dead.
It is an Jabsco/Flojet Triplex diaphragma pump type. The max. working temperature of these pumps is 60 degrees C ! So no wonder the pump went...
Maybe take a look at yours.
Thomas
I know the preoiler is an often discussed expensive piece of thing. Personally i wouldn't have put it in, but the former owner did. This should be just a quick info for those who believe in the function of the preoiler :-)
Clive, isn't this too much oil pressure for the spray bar inside the cover ?
Before buying a new pump i will throw out all except the cover....
Clive, isn't this too much oil pressure for the spray bar inside the cover ?
Before buying a new pump i will throw out all except the cover....
Clive, i will give that a try. Just to my understanding:
Removing the pump and the feed from oiltank to pump is clear so far, but what about the 4 way adapter ? At the moment the 4 feeds are going to:
1. Raceproved pump
2. Engine block
3. Oilcooler
4. Feed to the cam cover
So the cam cover is already connected to the oilcooler, isn't it ?
Thanks,
Thomas
Removing the pump and the feed from oiltank to pump is clear so far, but what about the 4 way adapter ? At the moment the 4 feeds are going to:
1. Raceproved pump
2. Engine block
3. Oilcooler
4. Feed to the cam cover
So the cam cover is already connected to the oilcooler, isn't it ?
Thanks,
Thomas
Gassing Station | Speed Six Engine | Top of Page | What's New | My Stuff