DIY Headlight Alignment?
Discussion
why not just get the 40mm H7U if you are unsure as the bightness is the same and it will give you another 5mm clearance from bulb end to glass..? fitting is the same anyway... if you ebay it for the whole stuff make sure the ballasts are stainless and the bulbs are the better quality with ceramic ends etc not all plastic....
ok ordering a kit and just seen also you can get 55w and 35w...
the 55w changes the colour and brightness too.
ideal setup is 55w /6000k same colour as 35w/4200k but brighter..
im looking at changing the position of the dip beam too to a different location... just need to speak to my mot tester tomorrow about min heights.
with my day time running light(which dont turn off with headlights), this will be bright)dom
the 55w changes the colour and brightness too.
ideal setup is 55w /6000k same colour as 35w/4200k but brighter..
im looking at changing the position of the dip beam too to a different location... just need to speak to my mot tester tomorrow about min heights.
with my day time running light(which dont turn off with headlights), this will be bright)dom
Gassing Station | Ultima | Top of Page | What's New | My Stuff