Artificial grass electric brush diy project
Discussion
So, I'm living in a rented house with a AstroTurf lawn whilst we build our own house nearby. Im loving the lawn and will be having one at the new place. The problem i have is the maintenance, little as it is. The current place has a large pine tree over the lawn and it drops needles which neither broom nor vacuum cleaner seem to cope easily with. Professionals seem to use "powerbrooms" such as the petrol motors stihl or there is an electric one someone is trying to sell at £200. Fundamentally all they are is a rotating drum full of long nylon bristles.
So I'm thinking to save some money by making my own using an electric cylinder mower and some nylon brush draught excluders.
Would appreciate pH wisdom on this before I start. First thoughts are I will need to remove the cutting blade that the cylinder slices against. Maybe need to reverse the wiring so as to make the brushes push rather than scrape. What about cleaning the brushes? Just thinking they might just end up full of detritus unless there is some way of knocking it off. Or maybe the brushes will just lightly catch the dirt and throw it into the grass box?
Anyway, all thoughts appreciated...
So I'm thinking to save some money by making my own using an electric cylinder mower and some nylon brush draught excluders.
Would appreciate pH wisdom on this before I start. First thoughts are I will need to remove the cutting blade that the cylinder slices against. Maybe need to reverse the wiring so as to make the brushes push rather than scrape. What about cleaning the brushes? Just thinking they might just end up full of detritus unless there is some way of knocking it off. Or maybe the brushes will just lightly catch the dirt and throw it into the grass box?
Anyway, all thoughts appreciated...
OK so finally got round to jet washing the lawn and it works perfectly. Including removing pine needles. Obviously there is a risk of making holes, but only if you are an idiot and point it at your feet. Job done, 40sqm in under an hour. Given the time of year, probably won't need doing again till autumn.
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff