11th hour tile height opinions!

[bristolbaron]

I have a tiler coming tomorrow and have had a last minute doubt as to how high my tiles should go!

Tiles are plain white, 30cm x 60cm. Brick pattern, grey grout.

Above tile painted in mid/navy blue tbc.

Originally I was thinking top line, due to splashes from shower. Now I’m thinking bottom line might look better around window?

Edited by bristolbaron on Thursday 9th November 21:19

[bristolbaron]

Thanks all,

It might not be clear on the above photo, but the wall has a curve down towards the window. If I were to go to full ceiling height all round, I’d have to have a curved end tile on bath & mirror walls.. I can’t see this ever looking right.
Thoughts are to drop a tile below that height, leaving one solid area to paint.

All units and tiles are white so I reckon I can get away with a dark ceiling?

If I drop down too far (mid window) id have less tile at the end of the bath the shower will hit, plus a lot more dark paint.

I’ve added a photo showing curve and next two tile lines down.. typically, neither are mid window!

Area above sink etc will be at height of lowest line.

[bristolbaron]