Tell Us Something Really Trivial About Your Life Volume 36

[Scrump]

Glenners, do you have a view on dog owners hanging bags of dog eggs on trees rather than carrying them?

[glenrobbo]

Hang on a minute, Your Scrumpness, I'll just go and check.





Err...

As it happens, it seems I do, yes!

[StuntmanMike]

StuntdogMastiff eating breakfast at the top of the stairs.

He looks old here.

[StuntmanMike]

Came home to this last night. Tilers done and StuntwomanWife had made it tidy.

We have the skirting board being fitted and room decorated Monday.

Then that’s it. New kitchen turns up first week of April.

Out of darkness comets light as they say in the Black Country.

[StuntmanMike]

This was the scene that morning.

[StuntmanMike]

Got a 9 foot by 6 foot yellow furry rug thing coming for the floor.

[glenrobbo]

StuntmanMike said:

Got a 9 foot by 6 foot yellow furry rug thing coming for the floor.

Shagged piles ?

[slopes]

Looks good StuntWannabeLorryDriver and yes, StuntdogMastiff does look old in that picture but he is a handsome chap nonetheless

[Bobberoo99]

StuntmanMike said:

StuntdogMastiff eating breakfast at the top of the stairs.

He looks old here.

Aaaawwwww he's lovely, i reckon he needs a darn good hug!!! That front room is looking so mush better StuntmanMike!!!

An interesting morning for me for a change, been asked for help from three different people, first on how to set and adjust an air gauge for a nonstandard size, second on how to set and turn a set of internal soft jaws, apparently my response of "fking carefully!!" wasn't the help he was looking for!!! And lastly the current Alpha (semi manual lathe) operator asking how he would be able to achieve a .002" rad in a corner on a diameter that's only .008" long in the first place!!! If anyone's interested the answer is adapt an internal groove tool, which has a .002" rad on the corner already, feed down the face at the required length to the diameter required and then withdraw the tool form the face along the created diameter!!!

[Scrump]

Bobberoo99 said:

An interesting morning for me for a change, been asked for help from three different people, first on how to set and adjust an air gauge for a nonstandard size, second on how to set and turn a set of internal soft jaws, apparently my response of "fking carefully!!" wasn't the help he was looking for!!! And lastly the current Alpha (semi manual lathe) operator asking how he would be able to achieve a .002" rad in a corner on a diameter that's only .008" long in the first place!!! If anyone's interested the answer is adapt an internal groove tool, which has a .002" rad on the corner already, feed down the face at the required length to the diameter required and then withdraw the tool form the face along the created diameter!!!

I'm the operator with my pocket calculator
I'm the operator with my pocket calculator
I am adding
And subtracting
I'm controlling
And composing
I'm the operator with my pocket calculator
I'm the operator with my pocket calculator

[glenrobbo]

If a masochist asks you for help, just say "No!"

Unless you're a sadist...

[Bobberoo99]

Scrump said:

Bobberoo99 said:

An interesting morning for me for a change, been asked for help from three different people, first on how to set and adjust an air gauge for a nonstandard size, second on how to set and turn a set of internal soft jaws, apparently my response of "fking carefully!!" wasn't the help he was looking for!!! And lastly the current Alpha (semi manual lathe) operator asking how he would be able to achieve a .002" rad in a corner on a diameter that's only .008" long in the first place!!! If anyone's interested the answer is adapt an internal groove tool, which has a .002" rad on the corner already, feed down the face at the required length to the diameter required and then withdraw the tool form the face along the created diameter!!!

I'm the operator with my pocket calculator
I'm the operator with my pocket calculator
I am adding
And subtracting
I'm controlling
And composing
I'm the operator with my pocket calculator
I'm the operator with my pocket calculator

To the tune of The Prodigy's Firestarter!!!

[StuntmanMike]

glenrobbo said:

StuntmanMike said:

Got a 9 foot by 6 foot yellow furry rug thing coming for the floor.

Shagged piles ?

I think it is, the carpet that used to be there was a brown shag pile.

The rug was going to cost a few hundred but a cheap on came up on Amazon and had really good reviews so we will try it.

[StuntmanMike]

Bobberoo99 said:

Scrump said:

Bobberoo99 said:

An interesting morning for me for a change, been asked for help from three different people, first on how to set and adjust an air gauge for a nonstandard size, second on how to set and turn a set of internal soft jaws, apparently my response of "fking carefully!!" wasn't the help he was looking for!!! And lastly the current Alpha (semi manual lathe) operator asking how he would be able to achieve a .002" rad in a corner on a diameter that's only .008" long in the first place!!! If anyone's interested the answer is adapt an internal groove tool, which has a .002" rad on the corner already, feed down the face at the required length to the diameter required and then withdraw the tool form the face along the created diameter!!!

I'm the operator with my pocket calculator
I'm the operator with my pocket calculator
I am adding
And subtracting
I'm controlling
And composing
I'm the operator with my pocket calculator
I'm the operator with my pocket calculator

To the tune of The Prodigy's Firestarter!!!

Scrumps local ( it is actually in Bristol).

[slopes]

StuntmanMike said:

Bobberoo99 said:

Scrump said:

Bobberoo99 said:

An interesting morning for me for a change, been asked for help from three different people, first on how to set and adjust an air gauge for a nonstandard size, second on how to set and turn a set of internal soft jaws, apparently my response of "fking carefully!!" wasn't the help he was looking for!!! And lastly the current Alpha (semi manual lathe) operator asking how he would be able to achieve a .002" rad in a corner on a diameter that's only .008" long in the first place!!! If anyone's interested the answer is adapt an internal groove tool, which has a .002" rad on the corner already, feed down the face at the required length to the diameter required and then withdraw the tool form the face along the created diameter!!!

I'm the operator with my pocket calculator
I'm the operator with my pocket calculator
I am adding
And subtracting
I'm controlling
And composing
I'm the operator with my pocket calculator
I'm the operator with my pocket calculator

To the tune of The Prodigy's Firestarter!!!

Scrumps local ( it is actually in Bristol).

st!! Scrump lives in Brissle?? I better keep my eyes open when i am down that way next time
What makes it worse is, one of our previous residents lives down that way now

[glenrobbo]

StuntmanMike said:

glenrobbo said:

StuntmanMike said:

Got a 9 foot by 6 foot yellow furry rug thing coming for the floor.

Shagged piles ?

I think it is, the carpet that used to be there was a brown shag pile.

The rug was going to cost a few hundred but a cheap on came up on Amazon and had really good reviews so we will try it.

You can't beat a nice romantic evening on a shag pile rug, S&M.

Just in time for St Valentine's Day as well. You lucky lucky bugger!

[glenrobbo]

I'm a bit puzzled as to why Scrump is busy calculating pockets...

Perhaps it's a Brizzle thing?

[glenrobbo]

Bobberoo99 said:

Scrump said:

I'm the operator with my pocket calculator
I'm the operator with my pocket calculator
I am adding
And subtracting
I'm controlling
And composing
I'm the operator with my pocket calculator
I'm the operator with my pocket calculator

To the tune of The Prodigy's Firestarter!!!

I had it down as "Play that funky music".

[Scrump]

glenrobbo said:

Bobberoo99 said:

Scrump said:

I'm the operator with my pocket calculator
I'm the operator with my pocket calculator
I am adding
And subtracting
I'm controlling
And composing
I'm the operator with my pocket calculator
I'm the operator with my pocket calculator

To the tune of The Prodigy's Firestarter!!!

I had it down as "Play that funky music".

I should have realised that music from 1981 would a bit too modern for Trivton

[StuntmanMike]

slopes said:

StuntmanMike said:

Bobberoo99 said:

Scrump said:

Bobberoo99 said:

An interesting morning for me for a change, been asked for help from three different people, first on how to set and adjust an air gauge for a nonstandard size, second on how to set and turn a set of internal soft jaws, apparently my response of "fking carefully!!" wasn't the help he was looking for!!! And lastly the current Alpha (semi manual lathe) operator asking how he would be able to achieve a .002" rad in a corner on a diameter that's only .008" long in the first place!!! If anyone's interested the answer is adapt an internal groove tool, which has a .002" rad on the corner already, feed down the face at the required length to the diameter required and then withdraw the tool form the face along the created diameter!!!

I'm the operator with my pocket calculator
I'm the operator with my pocket calculator
I am adding
And subtracting
I'm controlling
And composing
I'm the operator with my pocket calculator
I'm the operator with my pocket calculator

To the tune of The Prodigy's Firestarter!!!

Scrumps local ( it is actually in Bristol).

st!! Scrump lives in Brissle?? I better keep my eyes open when i am down that way next time
What makes it worse is, one of our previous residents lives down that way now

fkin ell my eldest daughter is probably going to Bristol uni this year.