Yet more frivolous purchases, stuff you don't need...

[jimmyjimjim]

SistersofPercy said:

I looked at the ice cream maker but I think it’s for the standard models not the bowl lift, so happily for my waistline it won’t work
I do need to use it more though.

Bye bye waistline (I seem to recall you're an ice cream fan?):

https://www.kitchenaid.com/countertop-appliances/s...

"Fits all KitchenAid® Tilt-Head Stand Mixers, except Artisan® Mini models - KSM3316 and KSM3317. Fits all KitchenAid® Bowl-Lift Stand Mixers, except the following 5, 5.5 and 6 Quart models - K5SS, KSM50, KSM500 and KSM450."

[M1K3]

I definitely didn't need a multicolour 3D printer or 40+ rolls of different colour filament



I definitely do need huge LEGO



(second attempt is looking better now I jigged the settings)

Edited by M1K3 on Thursday 7th March 05:36

[SistersofPercy]

jimmyjimjim said:

Bye bye waistline (I seem to recall you're an ice cream fan?):

https://www.kitchenaid.com/countertop-appliances/s...

"Fits all KitchenAid® Tilt-Head Stand Mixers, except Artisan® Mini models - KSM3316 and KSM3317. Fits all KitchenAid® Bowl-Lift Stand Mixers, except the following 5, 5.5 and 6 Quart models - K5SS, KSM50, KSM500 and KSM450."

Ice cream is my utter downfall
Still not convinced though, my old mixer was a tilt head and my understanding is that you need this type for it to work. My KitchenAid is a bit different as the head doesn’t lift - there is a handle on the side and rather than the head moving the bowl moves up to the machine if that makes sense?

I’ll look into it properly later and double check. Be amazing if it would though!

[M1K3]

M1K3 said:

I definitely didn't need a multicolour 3D printer or 40+ rolls of different colour filament



I definitely do need huge LEGO



(second attempt is looking better now I jigged the settings)

Edited by M1K3 on Thursday 7th March 05:36

Hot off the press

[M1K3]

shunt said:

shunt said:

thewarlock said:

Custom tailored jeans.
£270, completely frivolous.

Love them.

Nice, where from?

Following on from this post mine will be with me shortly:

This post has also just cost me, I now have 6 pairs of shorts being made…

[illmonkey]

M1K3 said:

This post has also just cost me, I now have 6 pairs of shorts being made…

Jorts?

[DodgyGeezer]

illmonkey said:

M1K3 said:

This post has also just cost me, I now have 6 pairs of shorts being made…

Jorts?

[Dog Star]

Just had a Lego Ornithopter from Dune delivered.



It’s a bit more, er, technical than I expected; the assembly instructions run to 227 pages

Mrs DS says I can’t hang it from the lounge ceiling

[jimmyjimjim]

SistersofPercy said:

Ice cream is my utter downfall
Still not convinced though, my old mixer was a tilt head and my understanding is that you need this type for it to work. My KitchenAid is a bit different as the head doesn’t lift - there is a handle on the side and rather than the head moving the bowl moves up to the machine if that makes sense?

I’ll look into it properly later and double check. Be amazing if it would though!

Mine is a 600 series professional 6qt.

This, but in silver:

https://www.kitchenaid.com/countertop-appliances/s...

That's the standard over here.

[Mr E]

Loving the massive Lego.

[BckFlash]

DodgyGeezer said:

illmonkey said:

M1K3 said:

This post has also just cost me, I now have 6 pairs of shorts being made…

Jorts?

Git.

[SistersofPercy]

jimmyjimjim said:

Mine is a 600 series professional 6qt.

This, but in silver:

https://www.kitchenaid.com/countertop-appliances/s...

That's the standard over here.

Yep, that’s the one!
This could be VERY dangerous when I get back from holidays…

[jimmyjimjim]

If you're cunning, you'll pick it up on holiday

[M1K3]

Dog Star said:

Just had a Lego Ornithopter from Dune delivered.



It’s a bit more, er, technical than I expected; the assembly instructions run to 227 pages

Mrs DS says I can’t hang it from the lounge ceiling

What about mounting it on the wall?

[M1K3]

DodgyGeezer said:

illmonkey said:

M1K3 said:

This post has also just cost me, I now have 6 pairs of shorts being made…

Jorts?

Don't know how you found me but stop taking pics of me!

I'm not a piece of meat...!

[The_Nugget]

Well personally I don’t think it’s frivolous…Mrs Nugget on the other hand….

[C5_Steve]

Dog Star said:

Just had a Lego Ornithopter from Dune delivered.



It’s a bit more, er, technical than I expected; the assembly instructions run to 227 pages

Mrs DS says I can’t hang it from the lounge ceiling

Wicked Brick do a pretty decent stand for it that holds it upright. They had a wall mounted one that was very nice but it was a limited edition and sold out.

[miniman]

The_Nugget said:

Well personally I don’t think it’s frivolous…Mrs Nugget on the other hand….

I’m trying to work out what it’s attached to

[RedWhiteMonkey]

miniman said:

I’m trying to work out what it’s attached to

At first I thought it was a wok, but now I think its a paella pan.

[andrewcliffe]

SistersofPercy said:

Love Propstore but it's a dangerous place. Him indoors has a small Fett obsession and one of the most memorable scenes for him from his childhood was the cloud city dinner.
We were at an even some years ago and Propstore were there, was amazed to find a call sheet for that scene so bought it for him. Had a few other call sheet/artwork bits from them over the years.

Off to Disney for the first time this year next week, managed to squirrel away a nice little sum to spend, so expect me to turn into a human whirlwind in the Phantom Manor store

Colin Skeaping mentioned in that picture used to own a 1960's TVR Griffith my father later owned. He managed to crash it at least twice, requiring a new bodyshell.

Edited by andrewcliffe on Friday 8th March 11:04