Discussion
Which Naturvape coils to you use? In which tanks?
I have a couple of the cheapest ones at the moment... https://www.facebook.com/Naturevape/app_2514583162...
I have a couple of the cheapest ones at the moment... https://www.facebook.com/Naturevape/app_2514583162...
Does anyone else find that as trendy as these massive atomisers are that they won't unscrew where you want them to? I need to fill mine up and not will only inscrew at the battery. Yesterday I needed to swap batteries and it would only instea at the filler section.
Aaaarrrrrgggghhhhhj
Aaaarrrrrgggghhhhhj
LoonR1 said:
Does anyone else find that as trendy as these massive atomisers are that they won't unscrew where you want them to? I need to fill mine up and not will only inscrew at the battery. Yesterday I needed to swap batteries and it would only instea at the filler section.
Aaaarrrrrgggghhhhhj
Would I be right in thinking you have not let it cool down first?Aaaarrrrrgggghhhhhj
it is annoying half way through a vape that I need to fill up, only to realise that the thing is too warm to unscrew, almost unscrewed the chamber off a couple of times whilst waiting for it to cool.
Fotic said:
It's good because you still get your formaldehyde hit!LoonR1 said:
Absolute ste. Two sets of pliers couldn't separate it. Gone in the bin.
Did the same to a Kanger mini tank. I think what happens is you exert so much force it just bites the threads into each other and locks it in even tighter. The locking ring on my Nemises, hold it too tightly it will not turn. Try and spin it with one finger, no problem.
Cotty said:
How often to people strip their tanks down for a clean? I mean down to component parts. I suppose it one of those things where no one told me I had to so never really thought about it. 80 days in and I have just topped them up and changed a coil when needed.
Every Sunday night my atty gets a strip down, a soak in mildly soapy warm water, a dry, rebuild, and a new coil. Seems to work for me. Some of it depends what juice you're using, some get a bit sludgy towards the end of a tank so if you just keep topping up it gets thicker and kills your coil. Thinner, lighter juices don't cause this as much.
Put simply they're badly thought through. Shiny, smooth metal is not good for getting a grip on. This has grippy bits but only on the spinning piece for the airflow, which will easily spin, yet the the two pieces that need a little force to unscrew (battery and tank) are smooth metal and very slippy.
Stupid product.
Stupid product.
LoonR1 said:
Absolute ste. Two sets of pliers couldn't separate it. Gone in the bin.
If mine stick I'll get a marigold, 2 small pliers, wrap the tube/tank with the marigold then gently ease them apart. Works ok with my stuck tanks but both panzers are bloody welded tight on the locking ring so can't use them griffin dai said:
If mine stick I'll get a marigold, 2 small pliers, wrap the tube/tank with the marigold then gently ease them apart. Works ok with my stuck tanks but both panzers are bloody welded tight on the locking ring so can't use them
Tried all sorts, usi lots of grippy rubber between pliers to ensure no or minimal damage to the tank. I've completely dismantled it and it still will not come apart, hence it's in the bin and not coming out. If something is crap, then it goes in the bin. Cotty said:
How often to people strip their tanks down for a clean? I mean down to component parts. I suppose it one of those things where no one told me I had to so never really thought about it. 80 days in and I have just topped them up and changed a coil when needed.
I've been doing mine every couple days recently to try out some new juices. Did the lot earlier before coming to work and drove me nuts towards the end!Aerotank mega
Aerotank mini
Aerotank
Aerotank clone x2
Protank 3
Mini Protank 3 x2
Taifun GT x2
Pain in the arse (missis going ape!!!) but have to try these out before I go away again and get an order in!
LoonR1 said:
Tried all sorts, usi lots of grippy rubber between pliers to ensure no or minimal damage to the tank. I've completely dismantled it and it still will not come apart, hence it's in the bin and not coming out. If something is crap, then it goes in the bin.
What tank was it?If you want a decent cheap replacement these are pretty good. I've got a couple now and they're just as good as the genuine Aerotank.....but ditch the supplied coil as its crap & use genuine Kanger coils instead.
http://www.fasttech.com/product/1682500
VEA said:
Which Naturvape coils to you use? In which tanks?
I have a couple of the cheapest ones at the moment... https://www.facebook.com/Naturevape/app_2514583162...
I use the DCD coils in the Kanger tanks and the pro coil in the rg200/rg400 which are the same as their mini/midi pro tanks (look identical to me anyway!)I have a couple of the cheapest ones at the moment... https://www.facebook.com/Naturevape/app_2514583162...
Cotty - I've never done a full strip down and clean. Heads are king, so get cleaned or swapped. Drip tips get a wipe every couple of days, the air tube gets some twisted tissue shoved down them when I notice fluff in there...
Anyways, sod all this unreliable, poorly made crap - I may have mentioned once that I'd ordered a Billet Box...
Picked it up tonight on the way home from work, after nearly a fortnight delay at customs.
Pics to follow as soon as Thumbsnap decides to play ball, but suffice to say, build quality is simply superb, ergonomics are great, and I've just made myself lightheaded after half a dozen pulls of liquid I've been using for a while - at the same voltage as I've been running a dual coil atty on ego twist...
Using the billet bridge with aspire dual coil head, and five pawns Perpetual Check. Lovely.
Anyways, sod all this unreliable, poorly made crap - I may have mentioned once that I'd ordered a Billet Box...
Picked it up tonight on the way home from work, after nearly a fortnight delay at customs.
Pics to follow as soon as Thumbsnap decides to play ball, but suffice to say, build quality is simply superb, ergonomics are great, and I've just made myself lightheaded after half a dozen pulls of liquid I've been using for a while - at the same voltage as I've been running a dual coil atty on ego twist...
Using the billet bridge with aspire dual coil head, and five pawns Perpetual Check. Lovely.
griffin dai said:
I use the DCD coils in the Kanger tanks and the pro coil in the rg200/rg400 which are the same as their mini/midi pro tanks (look identical to me anyway!)
The RGM2 from FastTech takes a standard Naturevape coil very well.http://www.fasttech.com/products/1411/10006714/153...
£1.95 each!
Sway said:
Cotty - I've never done a full strip down and clean. Heads are king, so get cleaned or swapped. Drip tips get a wipe every couple of days, the air tube gets some twisted tissue shoved down them when I notice fluff in there...
Glad im not the only one. I used to use the second smallest air hole on my Nautilus Gassing Station | The Lounge | Top of Page | What's New | My Stuff