Garage Organisation

[B'stard Child]

OK so for many years the important function of my garage has been storage - as I have finished off projects the need for storage has been reduced and the need for a better working area has increased

I had some "one on one" welding tution with Malcolm from www.mig-welding.co.uk a while back and one thing I took away from the experience was a desire to build my own welding bench - it was a revelation to weld on a bench rather than on a workmate that liked catching fire on a regular basis

So my garage (archive picture)




[s][/s]

See what I mean about storage - and I was full to capacity at that time....

All the racking was also FOC from work (required a bit of TLC but was ideal for what I needed at the time and I've made sure that when removed it's found a good home in friends garages so again nothing wasted.

With a few project cars getting close to being finished storage was no longer a requirement what I needed now was a work bench and my own workplace provided the basics FOC...... amazing what companies throw away but as I'm a bit of (/womble in the sense that I hate to see stuff wasted) I was happy to provide the racking a new home.

So this was up for grabs



Obviously I hadn't really much need for another racking unit but I reckoned if I split it into two I'd end up with a 12 ft long work bench (2 x 6 ft benches with a sensible working height)

I planned to have a woodworking bench with vice etc mounted and then the second half as a welding area

So I purchased a 3 ft by 6 ft sheet of 5mm thick steel - probably a bit OTT but I will be doing a lot of work welding wise this winter so it seemed wise to make it robust.

Bench is 6 ft by 2 ft

I wanted a slight overlap to allow clamping of items to the work surface (thanks to Nigel for the heads up on that front as I was planning on finishing the edge flush with the racking

I also wanted to put a front lip and back lip to stop the surface moving on the cut down racking as well as stop stuff disappearing of the back of the surface



I think I got it fairly straight and level



Backstop (splashback)





I know the back is not quite vertical but I need to run some cables behind the welding bench and the wall has a step on it so I can live with the slight angle

Other pictures







Nice way to spend a saturday.......

[B'stard Child]

chryslerben said:

Nice top job there mate it's something that's on my list of things to do

Thanks I'd put up with a 5 ft length of kitchen worktop sat on 8 tote bins for quite a while and as I plan to have a busy time in the garage this winter I wanted to have a better working enviroment

Next thing is to re-do the electrickery

[B'stard Child]

Snake the Sniper said:

I've done something very similar for my work bench in my new garage:



It's 3m long, 650mm deep and a 3mm thick top. It's probably a bit high for others at 3', but then I'm 6'3" so I made it to what I wanted as I hate having to crouch over when working. Whilst I could weld on it I intend building a smaller mobile bench for welding on as I have a 10mm thick ally plate a previous employer "lost" one quiet afternoon.

I doesn't look that high - liking what you have done plasterboard walls wise - one day I'll get some more plasterboard free and I'll do the same

In the archive picture of my garage it had open roof (well partially boarded) but a while back I got some free sheets of plasterboard and a few rolls of loft insulation so I went from open to closed and re-did the lighting - can't seem to find any pics but it made a huge difference to temp in the winter months and keeps it cooler in the summer

[B'stard Child]

wildoliver said:

Is that a Lotus in the background?

yeah on four spacesavers

[B'stard Child]

Snake the Sniper said:

The walls aren't actually plaster boarded, it's 18mm ply. Looks about the same (well you think so anyway!) but means I can put anything anywhere. It was also £6 a go for 6' x 4' sheets on ebay.

Sheesh that's a bargain - and I get what a difference it would make for hanging stuff up

Snake the Sniper said:

Got to agree on the insulation. I've got 100mm of RWWA45 in the walls and 225mm, or the depth of the roof joists, in the ceiling. It's toasty warm.

Insulation is great all year round

- in the winter my garage with no heating is 4-5 deg warmer than outside
- Summer 4-5 Deg cooler

I'm considering insulating the external facing walls - some walls ar shared with house or neighbours garage so I can't see the point in doing them but some walls are single skin brick to outside so I reckon I'd get some further benefit that way

[B'stard Child]

The silver looked naff






Thats better

[B'stard Child]

Bloody hell that garage has more floor area than my house.....

painting garage floors is a pain, I think I'd look at polishing concrete options next time as you get no dust created on polished concrete but for a tamped floor painting is the only option to keep dust down

[B'stard Child]

Wedg1e said:

Hey up B'stard, I live over on the welding forum as well.. was that your LC that had lots of bits chopped out of it a few weeks back?
Some tidy welding on the bench, I bet the car won't be quite as easy

I could do with some organisation in my workshop as well...

correct that would be me, and I'm still welding it up.....