Winter gloves for working on cars (outside)?

[nedge2k]

Any recommendations?

Rightly or wrongly, I never wear gloves at the best of times but i've got a couple of cars I need to work on over the winter, one of which is outside so i'm after something as thin/hard wearing/flexible as possible whilst not allowing my extremities to freeze off. A degree of oil resistance would be handy also.

Considering these: http://www.mechanix.com/the-original-05mm

TIA.

Edited by nedge2k on Tuesday 26th November 10:06

[markmullen]

Have a look at SealSkinz, they're thin enough that I can work cameras through them, fully waterproof and have grippy bits on the palms.

[Gafferjim]

Just get a box of those heavy duty surgical type, ie the same that Ed China uses in his workshop, you'll be surprised at how warm your hands will be,without that "getting in the way" feeling, plus they keep your hands clean.
A box of these are cheap as chips.
Machinemart have them in various sizes, but you can get them in plenty of other places. http://www.machinemart.co.uk/shop/product/details/...

[nedge2k]

i've looked at the sealskinz but how is their abrasion resistance? they do some which are steel spun...but they're £50!

[nedge2k]

jim, really don't get on with those type of gloves, feels like your hands are suffocating.

[Panda P]

I've tried a few things such as doubling up and thicker gloves but you lose some dexterity if you go too thick or too tight. I've even shoved those gel hand warmers in latex gloves behind the back of my hands while working which eventually warms most of your hand but doesn't eliminate the problem completely.

After a particularly painful weekend I am investing in some Keep Safe (brand) Thermal Grip Gloves. They aren't waterproof but have thermal properties and decent grip on your palms and finger tips; I plan to slip a pair of latex gloves on over the top when required.

Another brand to look at is Showa. Their Thermal Grip Gloves are popular with sailing ethusiasts it seems. They look good but the frequency in which they can be washed is limited as the grip coating degrades.

All options will set you back no more than £5 .

Here are some helpful links:

Keep Safe: http://www.greenham.com/c/pl/134834/Keep-Safe-Ther...

Showa: http://www.screwfix.com/p/showa-best-451-general-h...

[markmullen]

nedge2k said:

i've looked at the sealskinz but how is their abrasion resistance? they do some which are steel spun...but they're £50!

I'm not a mechanic so can't comment from that PoV but I've used them for scrabbling down cliffs holding onto sharp rocks etc and have never had an issue.

[nedge2k]

muchos gracias Panda

[nedge2k]

markmullen said:

I'm not a mechanic so can't comment from that PoV but I've used them for scrabbling down cliffs holding onto sharp rocks etc and have never had an issue.

cheers, will keep in mind

[Agent Orange]

I'd hardly class myself as a mechanic but when ever I've dabble with the oily bits I use Liscombe Hyfit 612-09 gloves. Like you I hate latex gloves and your hands feel suffocated. These are the best gloves I've found. In fact bar gardening I use them for pretty much everything else where in contact with dirty or oily items.

Unfortunately my supply dried up ever since my father retired from Fords and worse the Swaythling plant is now closed.

I have one solitary pair left and I'm not aware of a place to get them. I should call Liscombe themselves really... https://www.liscombe.co.uk/

[northandy]

I have a pair of Gripz gloves I use on the cars, rubberised grip but also close fitting so brilliant when working with them on.

I can't seem to see them on the web, I thought they came from Arco as I was given them from work.

Edit... These are them

http://trades-wear.co.uk/shop/general-handling/359...