Have snow chains now need the tyres
Discussion
I managed to get a set of snow chains on ebay for not very much. They are exceeding well built and would cost a fecking fortune to buy new.
However they are a tad too small for the tyres on my landrover.
It needs new tyres so i want to buy a set of tyres that will fit
So how can i measure the chains and then work backwards to arrive at the correct tyre size.
However they are a tad too small for the tyres on my landrover.
It needs new tyres so i want to buy a set of tyres that will fit
So how can i measure the chains and then work backwards to arrive at the correct tyre size.
Snowboy said:
The chains should have a tyre size on the box.
If they were very cheap they might be chains for tiny little Mini wheels, so you'll have a hard time getting them to fit on a Landy.
Lay them flat, measure them end to end.
That'll give you a circumference of the wheel they can fit.
Do some maths and work out what size tyre you need on your wheel to fit into that circumference.
You may need to use Pi.
Mmmmmm Pi.
Which sounds very clever but.If they were very cheap they might be chains for tiny little Mini wheels, so you'll have a hard time getting them to fit on a Landy.
Lay them flat, measure them end to end.
That'll give you a circumference of the wheel they can fit.
Do some maths and work out what size tyre you need on your wheel to fit into that circumference.
You may need to use Pi.
Mmmmmm Pi.
They didn't come in a box so that doesn't work
They are about a few inches too short
Snow chains don't go around the very outside of the tyres the side chains are normally halfway up the sidewalls.
its not that simple
Gassing Station | General Gassing | Top of Page | What's New | My Stuff