Miss Firing KA - Arcing HT Lead

Miss Firing KA - Arcing HT Lead

Author
Discussion

Too Late

Original Poster:

5,117 posts

241 months

Tuesday 30th July 2013
quotequote all
My station wagon had an arcing HT lead near the lambda sensor causing it to miss fire. The Engine warning light is now on (Yellow)



Now i have moved the HT lead and taped it up but the engine warning light is still on. Do i need to wipe the current warning code or do i need to replace the lambda sensor?

Its my station wagon AKA money pit at the moment so could do with the cheapest option

2 months ago - full service = £180
3 weeks ago miss firing = HT LEADS = £20
2 weeks ago Thermostat gone, not knowing that i replaced the heater control valve hoping to fix it, it didnt.
Heater control valve = £10
Thermostat and header tank = £144



Thanks
N

Too Late

Original Poster:

5,117 posts

241 months

Tuesday 30th July 2013
quotequote all
Rickyy said:
Is it a Ka? Just I read "station wagon" and picture a huge estate car!

Try unplugging the battery for a while, I believe this resets the ECU and would hopefully clear the fault code.
It is a KA smile and if you saw how messy it was you would think its a wagon smile

Thanks, i will give that a go!

N

Too Late

Original Poster:

5,117 posts

241 months

Tuesday 30th July 2013
quotequote all
One of the HT leads was on the metal plate and had melted it slightly, looks like it had come away from the cable claw it was held in place by.

Because of this, the arcing HT lead was stopping a sparkplug from lighting. Solved the miss fire.

Havent taken the battery out yet, will do tomorrow

Thanks for the replies!

Too Late

Original Poster:

5,117 posts

241 months

Thursday 1st August 2013
quotequote all
Disconnecting the battery for 30 mins, then taking it for a drive solved the issue

Thanks!