Rear hubs 4stud
Discussion
hillclimbmanic said:
I've just upgraded to the 500 hub carriers, for the bigger discs, calipers, etc., pair of unveiled(unveiled.?? Damn this predictive sh*t..!) 400 ones just sat in my garage...
Er The 400 ones just set in the garage would you like to part with one of them ? Edited by hillclimbmanic on Sunday 29th May 13:25
Ste .
http://www.ebay.co.uk/itm/FORD-SIERRA-INNER-STUB-A...
Not the right ones - for drums I think - but I bought a set from these guys. Bit tight on the shaft/bearing so may need machining a smidge - you said this wasn't an issue.
Not the right ones - for drums I think - but I bought a set from these guys. Bit tight on the shaft/bearing so may need machining a smidge - you said this wasn't an issue.
mk1fan said:
http://www.ebay.co.uk/itm/FORD-SIERRA-INNER-STUB-A...
Not the right ones - for drums I think - but I bought a set from these guys. Bit tight on the shaft/bearing so may need machining a smidge - you said this wasn't an issue.
This not that lol Not the right ones - for drums I think - but I bought a set from these guys. Bit tight on the shaft/bearing so may need machining a smidge - you said this wasn't an issue.
Take a look at these. Good value when you consider they come fitted with bearings. I fitted these last year and very impressed. http://anembo-engineering.mybigcommerce.com/2wd-bi...
very nice , its the hub I need like the one in the picture I have put on here ,not the carrier , the carriers are very nice but they have no hubs do they or I would have had them , my carriers are now fitted with new bearings. and one is now complete but the other is not so I am looking for the hub , the hub I have is no good because the bearing sized on to it and has badly worn the shaft , so I have now decided to buy a second hand sierra hub and hope this is a good one ?
thanks for all your comments
Ste .
thanks for all your comments
Ste .
Plan B said:
Take a look at these. Good value when you consider they come fitted with bearings. I fitted these last year and very impressed. http://anembo-engineering.mybigcommerce.com/2wd-bi...
No do not use these, I fitted a pair and they failed on both sides and destroyed the stub shafts, stick with the cast rear hub carriers !!!! Gassing Station | Chimaera | Top of Page | What's New | My Stuff