Discussion
Building a 997 and had some feedback to start a Thread. So here you are
Found a decent C2S manual in Black and stripped it back.
Will update bits as they get done.
My brief is a nice road car, not after power or super lightweight, I have a 991.2 GT3 and 996 Racecar, so not trying to make a fake.
I want a clean look so no wings or duck tails. Working with my race team and using only proven products. You wont see centre exhausts and cold air intakes that rob power. Taking the engine to 3.9 with new pistons and liners, work on the throttlebody, plenum and some ECU work to bump up mid range torque. We are confident on what will make and have an engine Dyno so will post REAL FIGURES when done. Not going to 4L as discussed with Porsche Motorsport and it takes too much material away. 3.9 has been done a lot in US and cars have well over 100k miles trouble free.
Head will be stripped cleaned and better valve springs put in with valves reseated and replaced as required. Will gas flow but just a clean up not other head work
RSS suspension components as they are amazing and dampers built to our spec.
Gearbox will be inspected, LSD, cup cables and short shift put in. LWFW.
New interior (going Pepita with dark grey)
Colour will be revealed but will be Bentley paint (best quality) and flatted with 2 x clear coat.
Wheels are Tech Art Fomula 2 (I love a deep dish!)
Brakes rebuild calipers, Giro Discs, PF pads, new Master cylinder. we have the ability to change the ABS programming so will see.
Lowered a bit but not too much as the rear roll center on 997 is 3:1 so every 1mm you lower the car you lower the CoG by 3mm. They are better with some rake. The look good slammed but dont drive well
Front end will have new Cup car PU, rear will be standard (Follow a 997 they look great as standard)
New ICE with apple car play, some carbon bits but not too many.
Seats will be Corbeau, LWB, in cloth, keeping rears and re-trimming
Price to all this including car 60k MAX maybe 55 if I am lucky
So far car is great very clean. We need to do a small repair on front subframe or replace thats the only problem.
Engine is filthy, oil pump was leaking.
Found a decent C2S manual in Black and stripped it back.
Will update bits as they get done.
My brief is a nice road car, not after power or super lightweight, I have a 991.2 GT3 and 996 Racecar, so not trying to make a fake.
I want a clean look so no wings or duck tails. Working with my race team and using only proven products. You wont see centre exhausts and cold air intakes that rob power. Taking the engine to 3.9 with new pistons and liners, work on the throttlebody, plenum and some ECU work to bump up mid range torque. We are confident on what will make and have an engine Dyno so will post REAL FIGURES when done. Not going to 4L as discussed with Porsche Motorsport and it takes too much material away. 3.9 has been done a lot in US and cars have well over 100k miles trouble free.
Head will be stripped cleaned and better valve springs put in with valves reseated and replaced as required. Will gas flow but just a clean up not other head work
RSS suspension components as they are amazing and dampers built to our spec.
Gearbox will be inspected, LSD, cup cables and short shift put in. LWFW.
New interior (going Pepita with dark grey)
Colour will be revealed but will be Bentley paint (best quality) and flatted with 2 x clear coat.
Wheels are Tech Art Fomula 2 (I love a deep dish!)
Brakes rebuild calipers, Giro Discs, PF pads, new Master cylinder. we have the ability to change the ABS programming so will see.
Lowered a bit but not too much as the rear roll center on 997 is 3:1 so every 1mm you lower the car you lower the CoG by 3mm. They are better with some rake. The look good slammed but dont drive well
Front end will have new Cup car PU, rear will be standard (Follow a 997 they look great as standard)
New ICE with apple car play, some carbon bits but not too many.
Seats will be Corbeau, LWB, in cloth, keeping rears and re-trimming
Price to all this including car 60k MAX maybe 55 if I am lucky
So far car is great very clean. We need to do a small repair on front subframe or replace thats the only problem.
Engine is filthy, oil pump was leaking.
Thanks for the suggestions
Yes I run Magnesium wheels on my race cars and we get everything crack tested. The front sub-frames have a problem at the suspension mounting points they need strengthening, its an easy fix
On the suspension, most of the multi link parts will be replaced. On the coffin arms we may, but its not really necessary. All new bushes and ball joints.
I am worried Bahama looks good on a period car in California, may look bad on a modern car in the UK in Feb!
Forest Green looks good, there have been a few 991 RS in this colour and they pop. There is also Lago and Jet.
Getting a Gripper Diff made, so working out pre loads.
Engine bits are here so machining and fitting liners this week, start rebuild next week. Crank is in great shape and still perfectly balanced. Head is 100% as well, will gas flow and replace seats and springs. Will be bumping redline up a touch to 7400
Yes I run Magnesium wheels on my race cars and we get everything crack tested. The front sub-frames have a problem at the suspension mounting points they need strengthening, its an easy fix
On the suspension, most of the multi link parts will be replaced. On the coffin arms we may, but its not really necessary. All new bushes and ball joints.
I am worried Bahama looks good on a period car in California, may look bad on a modern car in the UK in Feb!
Forest Green looks good, there have been a few 991 RS in this colour and they pop. There is also Lago and Jet.
Getting a Gripper Diff made, so working out pre loads.
Engine bits are here so machining and fitting liners this week, start rebuild next week. Crank is in great shape and still perfectly balanced. Head is 100% as well, will gas flow and replace seats and springs. Will be bumping redline up a touch to 7400
Corners back on with the original mutlilinks but new Dampers and Top Mounts. RSS bits delayed, will change next week. All components lose re bushing has been easy.
Re bushing with Powerflex as we go
Have a problem with the front Bumper as wanted to use a Cup Car Front. These need the hockey stick and wider fender and we cant make it look good easily so will chose a different front end now, anybody who knows where I can get a 997.1 GT3 style?
Re bushing with Powerflex as we go
Have a problem with the front Bumper as wanted to use a Cup Car Front. These need the hockey stick and wider fender and we cant make it look good easily so will chose a different front end now, anybody who knows where I can get a 997.1 GT3 style?
Gassing Station | 911/Carrera GT | Top of Page | What's New | My Stuff