Discussion
Hi guys, found this post though the search, wondering how the side pods are actually fixed to the body and also the 3 slits on the rear,clam each side of the rear tail lights?
I have order some from SWLC.
Is there a template for this as well or does some one do this?
Any help appreciated.
I have order some from SWLC.
Is there a template for this as well or does some one do this?
Any help appreciated.
When I fitted mine I used mesh, glued and screwed them on.
I used a piece of cardboard scribed to the shape of the body as a guide, shaped the mesh and glued it to the inside of the pods first.
A piece of rubber to cover the sharp edges so it didn't mark the paint.
You'll need to cut out the original mesh and remove the part that's bonded on unless your planning on cutting it all out like the M400, I couldn't bring myself to butchering the body.
Good luck!
I used a piece of cardboard scribed to the shape of the body as a guide, shaped the mesh and glued it to the inside of the pods first.
A piece of rubber to cover the sharp edges so it didn't mark the paint.
You'll need to cut out the original mesh and remove the part that's bonded on unless your planning on cutting it all out like the M400, I couldn't bring myself to butchering the body.
Good luck!
Edited by simonx50 on Friday 31st October 22:13
Gassing Station | Noble | Top of Page | What's New | My Stuff