Pictures of your Kit Car…

[bill bob]

The P&J. Tornado Raptor V8
regards
Bill Bob

Edited by bill bob on Monday 21st December 20:18

[iiyama]

Here's a few of mine then:-

[Keep it stiff]

[hampshire3321]

spdpug98 said:

hampshire3321 said:

Some very nice cars in here - Makes me want one even more!

Id like a 7 shaped car but am not a small guy - Im 6'2" and not small built - Would i fit in one?

Andy

The MNR chassis has a big cabin area and you should have no problem getting in one, it is much bigger than say a Caterham.

I see that you are based in Hants, I am also in Hants down on the south coast (Titchfield) and you are more than welcome to have a try in mine

Edited by spdpug98 on Monday 21st December 15:29

Wow what can i say. Thank you very much - Always refreshing to find good people willing to help.

Im currently recoving from a broken femur and am stuck in plaster for the next couple of months so know i'll never get in on in my current state, but if the offer is still open when im out of plaster id love to take you up on it.

Had a read through of your build diary and the car looks great. You have done a top job their.

Cheers, Andy

[spdpug98]

hampshire3321 said:

spdpug98 said:

hampshire3321 said:

Some very nice cars in here - Makes me want one even more!

Id like a 7 shaped car but am not a small guy - Im 6'2" and not small built - Would i fit in one?

Andy

The MNR chassis has a big cabin area and you should have no problem getting in one, it is much bigger than say a Caterham.

I see that you are based in Hants, I am also in Hants down on the south coast (Titchfield) and you are more than welcome to have a try in mine

Edited by spdpug98 on Monday 21st December 15:29

Wow what can i say. Thank you very much - Always refreshing to find good people willing to help.

Im currently recoving from a broken femur and am stuck in plaster for the next couple of months so know i'll never get in on in my current state, but if the offer is still open when im out of plaster id love to take you up on it.

Had a read through of your build diary and the car looks great. You have done a top job their.

Cheers, Andy

No problem, just drop me a message when you want to have a look

[CraigJ]

DELETED: Comment made by a member who's account has been deleted.

Its called an onyx mongoose. it has 2 kawasaki zx10 engines in it.

[bassett]

Some very nice cars chaps, i think the dax rush turbo does it for me along with the wicked colour scheme + graphics.
Heres my contribution, my home build MNR Vortx Inboard with R1 lump. Pics taken as it was ready for SVA but i cant find anything with the latest mods.

Adam

[iiyama]

If your on about the Dax above bud, no turbo fitted!

Hampshire, if you wanna try a Dax Im 3 mins up the road from Dave.

[busa turbo]

Few more of Dax Hayabusa Turbo!!

[chuntington101]

/\/\/\/\/\ You lucky .....!

Lovely car mate and what an engine! Whats the power delivery like?

[sjmmarsh]

hampshire3321 said:

Some very nice cars in here - Makes me want one even more!
I'd like a 7 shaped car but am not a small guy - Im 6'2" and not small built - Would i fit in one?
Andy

Andy

I have had a Caterham SV and a CSR - both have room for me at 6'4" and 120kg, so worth having a look at one of these. Some of the other 7-alikes are reasonably sized as well - the Dax Rush is quite roomy.


]

Edited by sjmmarsh on Thursday 31st December 16:17

[busa turbo]

chuntington101 said:

/\/\/\/\/\ You lucky .....!

Lovely car mate and what an engine! Whats the power delivery like?

Hi here is a link to in bored vid at Brands sorry about the sound,460bhp-270lbft at 1.2 Bar of boost at Brands it was running 1 bar of boost.power deliver is good but struggle on road tyers!!but car is running drive by wire throttle so can dial in how harsh throttle responce is. http://www.youtube.com/watch?v=1Wxdu9vE0RM

Edited by busa turbo on Thursday 31st December 18:07

Edited by busa turbo on Thursday 31st December 18:15

Edited by busa turbo on Thursday 31st December 18:16

[TriPod1]

I thought I would add a pic of my creation. Its not really a 'kit' as such but I thought it maybe of interest to those who have a leaning towards cars missing a wheel!



More pics at the website - www.ozht.com/trike

Regards, Andrew.

[Stew2000]

Amazing trike Tripod.
What's the handling like with only the one wheel on the back?

bassett said:

Some very nice cars chaps, i think the dax rush turbo does it for me along with the wicked colour scheme + graphics.
Heres my contribution, my home build MNR Vortx Inboard with R1 lump. Pics taken as it was ready for SVA but i cant find anything with the latest mods.
http://i83.photobucket.com/albums/j285/vwbassett/a...
Adam

Was it your MNR that I saw at Bentley a few months ago?
It looks nearly the same.

[singlecoil]

TriPod1 said:

More pics at the website - www.ozht.com/trike

This is what AVG had to say about the above site

"The page you are trying to access has been identified as a known exploit, phishing, or social engineering web site and therefore has been blocked for your safety."

I daresay that isn't true, but it would seem there is some kind of problem

Second time I tried it there was no problem. Just one of those things?

Edited by singlecoil on Friday 1st January 15:21

[Funky Diver]

and Avast still picks up a Trojan alert... JS:Illredir-B [Trj]

[kennyrayandersen]

I get to the site without warning.

[TriPod1]

Errghhh yes there was in fact a script from some POS from somewhere that had attached itself to that page by means I am not entirly sure of. Fixed now and apologies to any who may have contracted something by going to that page.

All a bit of a mystery but my windows machine would seem to have an issue (since Jan 1st) so rebuild time for the windows install (I am using my Linux installation at the moment).

Apologies again and I really must get a decent virus detection software!

Regards, Andrew.

[bassett]

stew2000 , yep thats mine with the addition of the flyscreen, racetech mirror and bike indicators. Hopefully mark will organise another event this year.

Edited by bassett on Sunday 3rd January 11:40

[electrik]

STAINLESS STEEL AND VX 220 SUSPENSION. STILL WORKING ON IT. I NEED A POWERFULL ENGINE >200HP FOR THIS VERY STRONG CHASIS.ITS LOCATED IN MACEDONIA GREECE