Discussion
prideaux said:
Well the poster said that everyone had bought them all and there is a nice one sitting there so obviously has not looked very hard
Another in Germany at nearly 3 time the price (another Dreamer) or are the dreamers waiting for 3D Printers so they can photo copy there collection of photos'
If you really want one of these great little cars there is no reason not to they are out there just forget what you could pick them up for 5 or 10 years ago
I can remember when petrol was 7 shillings and sixpence not anymore
Signed
Mr Grumpy
Hi Any,Another in Germany at nearly 3 time the price (another Dreamer) or are the dreamers waiting for 3D Printers so they can photo copy there collection of photos'
If you really want one of these great little cars there is no reason not to they are out there just forget what you could pick them up for 5 or 10 years ago
I can remember when petrol was 7 shillings and sixpence not anymore
Signed
Mr Grumpy
All's well I hope.
Just for the fun off this item " new vixen for everybody".
Penny wise and pound foolish, becomes pound wise and euro foolish.
Or the other way around.
This car is an better Sante Claus present IMHO. But what is an advice worth.
http://suchen.mobile.de/auto-inserat/tvr-andere-30...
And do not pay the asking price.
Hans
pete.reeve said:
It's a cable at the mo but I will convert to hydraulic. It's a old 681 block but I
needed a complete engine because of the pinto fitted.
Pete
Hi Pete,needed a complete engine because of the pinto fitted.
Pete
Do you have a picture of the slave cilinder on the bell house for hydraulic clutch.
I want to do the same and have not found the right way of fixing (or vixing)
Nice frame color and Nitrons by the way.
Thats a fine piece of cake.
Hans
Hansoplast said:
Thanx Pete,
I will look whether the pictures give me all the info needed.
Did you change anything insite (friction plates, sliding ??? trust carrier )
I know I have to change the fork/pushrod connection a little.
Keeps me from the street.
Hans
http://www.rwdmotorsport.com/2000e-gearbox-with-hydraulic-clutch-bellhousing.htmlI will look whether the pictures give me all the info needed.
Did you change anything insite (friction plates, sliding ??? trust carrier )
I know I have to change the fork/pushrod connection a little.
Keeps me from the street.
Hans
p
Edited by pete.reeve on Tuesday 25th February 06:55
pete.reeve said:
http://www.rwdmotorsport.com/2000e-gearbox-with-hy...
p
Thanx Pete for this info.p
Edited by pete.reeve on Tuesday 25th February 06:55
Nice but expensive. (But what is expensive)
Think the home made bracket will work well.
Must say your car is growing well, with all those parcels throug the door. Postman must have a sore back.
Hans.
Gassing Station | TVR Classics | Top of Page | What's New | My Stuff