Long shot but.......
Discussion
Geoff38 said:
Think I have one squirrelled away but never likely to use it , will dig it out tomorrow and post pics
... Thanks Geoff, don't bother post pics just post me the bellhousing And thanks everyone else for your comments and suggestions but I believe (may be wrong) that there is a Ford bellhousing that does the job, using a long input shaft gearbox (coz that's what I've got) with no adaptors or machining?
Edited by phillpot on Wednesday 30th November 18:15
Thanks for the link Stew, had "found" the Capri Club adaptor, that's on my options list!
All the V6 S Series cars used the type 9, that's where mine has come from, but they are onto the later Cologne V6. my understanding is the V6 variant has a longer input shaft (and different ratio's) than the version used in 4 cylinder Sierra's etc no idea about V4 set up?
Got one of those for my S3 but hit a wee snag, three bolt rather than two bolt starter, so got one of them, but solenoid is further round (not on top) so fouls on the chassis
Next stop... Hi Torque starter
also cast alloy sump from a 24v Cozzie Scorpio to go on one day.
Next stop... Hi Torque starter
also cast alloy sump from a 24v Cozzie Scorpio to go on one day.
Edited by phillpot on Wednesday 30th November 20:04
Sorted!
many thanks to Chris, and everyone else for advice, suggestions etc.
So now I need a pivot pin for the clutch arm, could use one out of gearbox in the car but would rather have everything ready to go in just in case there's a difference.
thought I had a spare original iron bellhousing, which would have the pin (bought from someone on here presumably) but turned the shed "upside down" and can only find a Cologne one so either I've lost it or really must look closer at what I buy!
many thanks to Chris, and everyone else for advice, suggestions etc.
So now I need a pivot pin for the clutch arm, could use one out of gearbox in the car but would rather have everything ready to go in just in case there's a difference.
thought I had a spare original iron bellhousing, which would have the pin (bought from someone on here presumably) but turned the shed "upside down" and can only find a Cologne one so either I've lost it or really must look closer at what I buy!
Gassing Station | TVR Classics | Top of Page | What's New | My Stuff