My Mk2 Orion zetec turbo
Discussion
Just the bumper to refit and it’s ready for Mot’ing...
Just in time for Classic Ford on Sunday
I’ll do all the brake upgrades after Classic Ford is out if the way...
Think I’ve got everything here for the job to go smoothly
FRS Brembo’s, duscst, pads
Stud & nut kit, 7mm wheel spacers to the calipers just clear the Borbets
10mm M12 shims to fit between adapters and hubs
Nos brake master cylinder, and some satin black to refurbish the servo
Just in time for Classic Ford on Sunday
I’ll do all the brake upgrades after Classic Ford is out if the way...
Think I’ve got everything here for the job to go smoothly
FRS Brembo’s, duscst, pads
Stud & nut kit, 7mm wheel spacers to the calipers just clear the Borbets
10mm M12 shims to fit between adapters and hubs
Nos brake master cylinder, and some satin black to refurbish the servo
So bumper was refitted last night
12 months Mot put on it today
Had to nip a rear wheel bearing up as it had slight movement in it...
While the wheels were off I fitted some new anti rattle springs in the rear brake callipers
Clean up time now in preparation for Classic Ford show...
12 months Mot put on it today
Had to nip a rear wheel bearing up as it had slight movement in it...
While the wheels were off I fitted some new anti rattle springs in the rear brake callipers
Clean up time now in preparation for Classic Ford show...
Edited by Slammedorion on Friday 31st May 19:57
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff