Yet another rescued E36 328i M Sport project...
Discussion
Starting to loose the plot now...
Think its day '10'...
Anyway, here are 'yet some more' pics after the parts have been painted and the car is starting to come back together...
Look at that 'Ass'
And the refurbed mirrors...
N.B. Didn't actually end up paying for the work on these BTW - OR the front and rear bumpers. The guys said that they couldn't put them back on the car in their 'rough' condition as they would let the car down.
Side on...
Tongue hanging out...
Due to new slam panel being fitted :-)
That's the old one sat on the floor BTW...
Front panels...
Underneath the front arches - not looking too bad, for their age...
Driver's side
Passenger side
They have even treated - wax oil, I believe - the inner front arches
Think its day '10'...
Anyway, here are 'yet some more' pics after the parts have been painted and the car is starting to come back together...
Look at that 'Ass'
And the refurbed mirrors...
N.B. Didn't actually end up paying for the work on these BTW - OR the front and rear bumpers. The guys said that they couldn't put them back on the car in their 'rough' condition as they would let the car down.
Side on...
Tongue hanging out...
Due to new slam panel being fitted :-)
That's the old one sat on the floor BTW...
Front panels...
Underneath the front arches - not looking too bad, for their age...
Driver's side
Passenger side
They have even treated - wax oil, I believe - the inner front arches
Edited by RickBristol on Sunday 21st February 13:04
Have just picked the car up from the body shop - after four weeks!
Although have been massively impressed, for what I have got for the money...
look at this...
AND those rear arches!!!...
Cost: around £1,500 - £500 of which was paid for by the insurance part of the job
Additional costs: £350 for re-badging, refurbing wheels, new slam-pannel work, new bonnet struts etc
Total cost: around £1,850 - very cheap concidering that I didn't pay for work to refurb the bumpers, mirrors, body trim and window seals etc
Although have been massively impressed, for what I have got for the money...
look at this...
AND those rear arches!!!...
Cost: around £1,500 - £500 of which was paid for by the insurance part of the job
Additional costs: £350 for re-badging, refurbing wheels, new slam-pannel work, new bonnet struts etc
Total cost: around £1,850 - very cheap concidering that I didn't pay for work to refurb the bumpers, mirrors, body trim and window seals etc
Edited by RickBristol on Saturday 11th October 17:26
In Two and a half weeks, the next phase of the project begins...
Have managed to sort a genuine M50 manifold, decent conversion kit, large throttle body and cold air induction kit - with heat shield. Will think about 'chipping' the car as I'm not convinced, when looking at the 'cost-benefit' analysis...
Have also sourced a complete set of one and-a-half year-old, second-hand Bilsten shocks for £220!!! Apparently only done a few thousand miles to boot
Happy days... :-)
Have managed to sort a genuine M50 manifold, decent conversion kit, large throttle body and cold air induction kit - with heat shield. Will think about 'chipping' the car as I'm not convinced, when looking at the 'cost-benefit' analysis...
Have also sourced a complete set of one and-a-half year-old, second-hand Bilsten shocks for £220!!! Apparently only done a few thousand miles to boot
Happy days... :-)
Edited by RickBristol on Monday 15th September 23:44
Edited by RickBristol on Thursday 18th September 20:19
Sir_Dave said:
Looking great!!!! But sooooooooooooooo let down by the replica wheels.
Please sort them out before any power mods.
My old one:
Totally agree!Please sort them out before any power mods.
My old one:
As I have no way of knowing what the originals would have been, I really fancy getting some original 'BBS' style BMW wheels, as I think they would suite it really well - after it has been lowered slightly, with the Bilstein shocks... Anyone know of any for sale?...
Either similar to yours, or like these...
LanceRS said:
St John Smythe said:
Totally agree, the original wheels look 100% better. Otherwise it just looks like you're trying to copy an e36 M3.
Once again! I feel the same, just what it came with and am working my way through its issues guys... Just going to take a bit of time - and lots of cash!!!jeff666 said:
The arches look spot on, ignore the bellwandos, nice project, good to see an old beemer being saved.
Thank you! Don't mind any constructive criticism. But, there will always be those who may be a little 'over-critical'...No disrespect to you either...
Doing my best, and probably lot more than most would be prepared to do...
RickBristol said:
Sir_Dave said:
Looking great!!!! But sooooooooooooooo let down by the replica wheels.
Please sort them out before any power mods.
My old one:
Totally agree!Please sort them out before any power mods.
My old one:
As I have no way of knowing what the originals would have been, I really fancy getting some original 'BBS' style BMW wheels, as I think they would suite it really well - after it has been lowered slightly, with the Bilstein shocks... Anyone know of any for sale?...
Either similar to yours, or like these...
LanceRS said:
They are the same wheel but mine are in desperate need of a refurb. They were listed as an option on the spec sheet for mine along with all the other bits that make up the sport. I know that I am biased, but I cannot think of another wheel that will suit it more.Your's is looking good, wish mine looked that way.
Great turn around, I think it will be a good investment in the long run, there are less and less good 328i sports left that aren't being used for drift days. It might take a few years though until they command decent values like good E30's do. And not being an M3 means that looking after them isn't horrendously expensive.
I have owned mine since 2011, but it hasnt been used since 2012 due to now needing a replacement engine, sits languishing in my garage at the moment. I agree on getting some nice BBS split rims for it though. Mine has slightly different ones to most. Most came with RC041, but mine was a special order with RC040's. Keep it up!
Also they all seem to sit lower on the drivers rear wheel
I have owned mine since 2011, but it hasnt been used since 2012 due to now needing a replacement engine, sits languishing in my garage at the moment. I agree on getting some nice BBS split rims for it though. Mine has slightly different ones to most. Most came with RC041, but mine was a special order with RC040's. Keep it up!
Also they all seem to sit lower on the drivers rear wheel
Its now been three weeks since I got the car back from the bodyshop - seems much longer, somehow...
Well, this weekend has been a very productive start to the next phase of this project. A friend came up from Southampton with the M50 manifold and large throttle body, to do the conversion work on my engine. He also brought the up-graded suspension parts, mentioned a few posts ago.
As always with these things, although the day went very well, it wasn't without its issues.....
Sam came up to Bristol on Friday evening, so that we could get an early start on Saturday morning. After going for breakfast, we then travelled over to my friends workshop to begin. We decided to start with the rear suspension up-grade.
This is how things looked after removing the wheels:
Shame about the slightly shakey photo.
These are the 'lovely' Bilstein B12 shocks that he brought along, complete with new top-mounts:
And the lovely, lovely Bilstein lowered springs, the original from the car for comparison, on the right:
After a relatively short time, and without too much effort, we had the springs fitted:
We then moved quickly on to the shocks.
Removing the top-mount brackets from inside the boot was the worst part of the job:
We were, however, given the run-around by the nuts that secured the top-mounts to the shocks, as the ones from my original shocks didn't fit the Bilsteins....
After running-around between a number of different car parts/accesory shops, we eventually found the correct size and type of Nylock nuts to finish this part of the job. Blew an hour and a half of our day though....
Still, we got there in the end:
This is the end-result of this part of the job, see how much lower the car now sits, 'tightened' the handling of the rear no-end too...
Cost: £330 with fitting
Well, this weekend has been a very productive start to the next phase of this project. A friend came up from Southampton with the M50 manifold and large throttle body, to do the conversion work on my engine. He also brought the up-graded suspension parts, mentioned a few posts ago.
As always with these things, although the day went very well, it wasn't without its issues.....
Sam came up to Bristol on Friday evening, so that we could get an early start on Saturday morning. After going for breakfast, we then travelled over to my friends workshop to begin. We decided to start with the rear suspension up-grade.
This is how things looked after removing the wheels:
Shame about the slightly shakey photo.
These are the 'lovely' Bilstein B12 shocks that he brought along, complete with new top-mounts:
And the lovely, lovely Bilstein lowered springs, the original from the car for comparison, on the right:
After a relatively short time, and without too much effort, we had the springs fitted:
We then moved quickly on to the shocks.
Removing the top-mount brackets from inside the boot was the worst part of the job:
We were, however, given the run-around by the nuts that secured the top-mounts to the shocks, as the ones from my original shocks didn't fit the Bilsteins....
After running-around between a number of different car parts/accesory shops, we eventually found the correct size and type of Nylock nuts to finish this part of the job. Blew an hour and a half of our day though....
Still, we got there in the end:
This is the end-result of this part of the job, see how much lower the car now sits, 'tightened' the handling of the rear no-end too...
Cost: £330 with fitting
Edited by RickBristol on Saturday 11th October 17:29
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff