My Monaro 6.0VXR S/C

[007 VXR]

[Beedub]

Definatly!!!! Im in!! When your ready!!! Cars looking pretty evil now!!! Silver n black is a winning combo!!!

[007 VXR]

Beedub said:

Definatly!!!! Im in!! When your ready!!! Cars looking pretty evil now!!! Silver n black is a winning combo!!!

Still waiting for rear diffuser and front splitter will need to be done But

Also august Mods will se her at over 700hp (fly)

Could be a few date coming up soon, will PM you when i know them

[madmover]

Cracking car mate, saw one not too long ago and boy was the noise immense!

[alan-87]

What's the hold up with the diffuser and splitter mark? Have the weezels bitten off more than they can chew?

[007 VXR]

alan-87 said:

What's the hold up with the diffuser and splitter mark? Have the weezels bitten off more than they can chew?

Iam not sure, Think they have been very busy.
Its was meant to be here last week for test fit, but still not turned up
About to ring them again, so fingers crossed


Just got of the phone with Carbon Weezels, its on its way today
for test fit, they have been very busy.

Carbon splitter should be ready in about 6-8 weeks
and diffuser in about 3-4 weeks, as long as we dont get snow
and i can get down to them for final fit

Edited by 007 VXR on Tuesday 17th January 09:27

Edited by 007 VXR on Wednesday 18th January 00:26

[007 VXR]

Going down to Carbon Weezels tomorrow for a test fit.
Will get some pics of the rear diffuser

[007 VXR]

madmover said:

Cracking car mate, saw one not too long ago and boy was the noise immense!

Just love the noise, even better now i have the cog drive fitted

[007 VXR]

Thinking of doing the front splitter like this

http://www.thesupercars.org/lexus/2012-lexus-lfa-n...

[neiljohnson]

Think you will end up raising the car if you fit a front splitter the fronts very close to the ground as is!!!

[007 VXR]

neiljohnson said:

Think you will end up raising the car if you fit a front splitter the fronts very close to the ground as is!!!

Will look at this, on my way down to carbon weezels now.
could lower the rear a bit to bring the front up 1/2" ?

[neiljohnson]

007 VXR said:

Will look at this, on my way down to carbon weezels now.
could lower the rear a bit to bring the front up 1/2" ?

Don't think you will get the clearance you will need you will probably have to reverse up the hill outside the pub

[Beedub]

007 VXR said:

Still waiting for rear diffuser and front splitter will need to be done But

Also august Mods will se her at over 700hp (fly)

Could be a few date coming up soon, will PM you when i know them

700!! well im definatly not going to have a chance!! lol!! ill give it a go however!! im just finishing ameth/water injection install...... should see me @ around 490-500hp at the wheels with alittle tuning thrown in....

any pics of said diffuser???

[007 VXR]

Beedub said:

any pics of said diffuser???

been to see it today still looks the same as pics already on this thread,
But should be finished in 2/3 weeks
Had test fit today and it was bang on
So they can fit the finns and cut holes for fixings.

Also they are starting work on the front splitter now

Edited by 007 VXR on Wednesday 18th January 21:06

Edited by 007 VXR on Wednesday 18th January 22:22

[007 VXR]

Beedub said:

700!! well im definatly not going to have a chance!! lol!! ill give it a go however!! im just finishing ameth/water injection install...... should see me @ around 490-500hp at the wheels with alittle tuning thrown in....

Mine will be 700fly about 550+RWHP
so not much in it

[007 VXR]

Some pics of carbon weezels work and a small right up on mine
(about half way down)
http://www.carbonweezel.co.uk/projects/index.html

[007 VXR]

neiljohnson said:

007 VXR said:

Will look at this, on my way down to carbon weezels now.
could lower the rear a bit to bring the front up 1/2" ?

Don't think you will get the clearance you will need you will probably have to reverse up the hill outside the pub

Looks like i will get away with it
But will have to reverse up on to your ramp

[CIE560]

"Watching" this thread now so I can keep up to dates with your carbon fibre antics... amazing car

[neiljohnson]

007 VXR said:

Looks like i will get away with it
But will have to reverse up on to your ramp

It's a sunken ramp so it will be low

[007 VXR]

neiljohnson said:

007 VXR said:

Looks like i will get away with it
But will have to reverse up on to your ramp

It's a sunken ramp so it will be low

Going to have to start driving around dead flys on the motorway