My Monaro 6.0VXR S/C
Discussion
chuntington101 said:
007 VXR said:
MOT all ok, Just starting to plan next years mods.
Water/meth injection
Bigger charge cooler
flat floor at last i hope.
Can i ask how you plan on making the chargecooler (CC) larger? i thought the M112/122 units where integrated into the lower intake manifold. Are you going to be using a spacer to lift the supercharger and run a custom thicker CC? Or are you making the heat exchange (low temp rad that sits at the front of the car in the cold air-stream) larger? Water/meth injection
Bigger charge cooler
flat floor at last i hope.
![paperbag](/inc/images/paperbag.gif)
chuntington101 said:
007 VXR said:
chuntington101 said:
007 VXR said:
MOT all ok, Just starting to plan next years mods.
Water/meth injection
Bigger charge cooler
flat floor at last i hope.
Can i ask how you plan on making the chargecooler (CC) larger? i thought the M112/122 units where integrated into the lower intake manifold. Are you going to be using a spacer to lift the supercharger and run a custom thicker CC? Or are you making the heat exchange (low temp rad that sits at the front of the car in the cold air-stream) larger? Water/meth injection
Bigger charge cooler
flat floor at last i hope.
![paperbag](/inc/images/paperbag.gif)
What are your plans for the HE? Big single unit? adding a couple of smaller units? Rear mounted?.....
Chris.
![hehe](/inc/images/hehe.gif)
Bigger front mounted (fingers crossed) Not that iam having issues, but better safe than sorry
![smile](/inc/images/smile.gif)
After_Shock said:
007 VXR said:
Bigger front mounted (fingers crossed) Not that iam having issues, but better safe than sorry ![smile](/inc/images/smile.gif)
Always a good idea, they seem a popular upgrade for the likes of the ZL1 Camaro, bigger rad more cooling capability and the more water you have in the system the more heat it can extract.![smile](/inc/images/smile.gif)
![biggrin](/inc/images/biggrin.gif)
chuntington101 said:
Here are some interesting ideas used on a Corvette ZR1.
http://forums.corvetteforum.com/c6-corvette-zr1/29...
Also might be worth looking at just trying to cram as big heat exchange as you can in there.
Chris.
Will have a read http://forums.corvetteforum.com/c6-corvette-zr1/29...
Also might be worth looking at just trying to cram as big heat exchange as you can in there.
Chris.
![thumbup](/inc/images/thumbup.gif)
After_Shock said:
Could be worth looking into the ZL1 upgrade, it uses a similar SC so the piping would in theory be similar, mounting brackets be different though.
![scratchchin](/inc/images/scratchchin.gif)
More cooling the better
![smile](/inc/images/smile.gif)
Very happy with the car now over all, just waiting on Roger to call about meth injection
![biggrin](/inc/images/biggrin.gif)
Still looking at other mods, but money abit short, while iam looking and buy a house and a flat
![frown](/inc/images/frown.gif)
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff