My Honda Accord Type R Big Turbo
Discussion
JayK12 said:
MotorsportTom said:
I hate seeing this thread updated because it makes me want the car everytime I see it.
I will gladly let you kick me in the testes is you promise to take me out in it!
In all seriousness congrats OP because that car is an absolute masterpiece
Thanks for the comment, means alot! I will gladly let you kick me in the testes is you promise to take me out in it!
In all seriousness congrats OP because that car is an absolute masterpiece
Hehe, you can have it if you want! In all fairness ive had a few people wanting to buy it from all around Europe but at the mo i just cant bring myself to sell it.
Once its all up and running again if your around my area's id gladly take you out in it, without kicking you in the balls!! lol.
And thanks for the offer, i'll PM you as your whereabouts aren't in your profile
Been quite a while since i updated this.
Time to start making my 2012 changes on this car.
New clutch plates from clutch master, the others were far to aggressive on the road. These have arrived.
Brain crower stage 3 custom turbo camshafts, these arrive next week.
Engine is coming out, these parts are going in.
Making a few changes to the engine mounts, possibly relocating the alternator, once engine is all back in and hooked up Oil cooler is being replaced and moved into the left wheel arch, Full size race rad is in place.
I removed the slam panel to make space for the Full size rad already, so i need new mounts for the intercooler.
Im also going for a new manifold, possibly top mount.
Then it will need aero catches for the bonnet to close - Remap and then all done
Oh the gearbox is in, and geared to 201mph @ 9500rpm. Im hoping to get to 185+mph.
Overall the car should be more driveable, spool up alittle quicker, make more power, make more torque (the most important), higher top end.
Looking forward to getting started next weekend
Time to start making my 2012 changes on this car.
New clutch plates from clutch master, the others were far to aggressive on the road. These have arrived.
Brain crower stage 3 custom turbo camshafts, these arrive next week.
Engine is coming out, these parts are going in.
Making a few changes to the engine mounts, possibly relocating the alternator, once engine is all back in and hooked up Oil cooler is being replaced and moved into the left wheel arch, Full size race rad is in place.
I removed the slam panel to make space for the Full size rad already, so i need new mounts for the intercooler.
Im also going for a new manifold, possibly top mount.
Then it will need aero catches for the bonnet to close - Remap and then all done
Oh the gearbox is in, and geared to 201mph @ 9500rpm. Im hoping to get to 185+mph.
Overall the car should be more driveable, spool up alittle quicker, make more power, make more torque (the most important), higher top end.
Looking forward to getting started next weekend
JayK12 said:
Been quite a while since i updated this.
Time to start making my 2012 changes on this car.
New clutch plates from clutch master, the others were far to aggressive on the road. These have arrived.
Brain crower stage 3 custom turbo camshafts, these arrive next week.
Engine is coming out, these parts are going in.
Making a few changes to the engine mounts, possibly relocating the alternator, once engine is all back in and hooked up Oil cooler is being replaced and moved into the left wheel arch, Full size race rad is in place.
I removed the slam panel to make space for the Full size rad already, so i need new mounts for the intercooler.
Im also going for a new manifold, possibly top mount.
Then it will need aero catches for the bonnet to close - Remap and then all done
Oh the gearbox is in, and geared to 201mph @ 9500rpm. Im hoping to get to 185+mph.
Overall the car should be more driveable, spool up alittle quicker, make more power, make more torque (the most important), higher top end.
Looking forward to getting started next weekend
Amazing, keep it up. I'd love to see this car in the metal.Time to start making my 2012 changes on this car.
New clutch plates from clutch master, the others were far to aggressive on the road. These have arrived.
Brain crower stage 3 custom turbo camshafts, these arrive next week.
Engine is coming out, these parts are going in.
Making a few changes to the engine mounts, possibly relocating the alternator, once engine is all back in and hooked up Oil cooler is being replaced and moved into the left wheel arch, Full size race rad is in place.
I removed the slam panel to make space for the Full size rad already, so i need new mounts for the intercooler.
Im also going for a new manifold, possibly top mount.
Then it will need aero catches for the bonnet to close - Remap and then all done
Oh the gearbox is in, and geared to 201mph @ 9500rpm. Im hoping to get to 185+mph.
Overall the car should be more driveable, spool up alittle quicker, make more power, make more torque (the most important), higher top end.
Looking forward to getting started next weekend
JayK12 said:
Been quite a while since i updated this.
Time to start making my 2012 changes on this car.
New clutch plates from clutch master, the others were far to aggressive on the road. These have arrived.
Brain crower stage 3 custom turbo camshafts, these arrive next week.
Engine is coming out, these parts are going in.
Making a few changes to the engine mounts, possibly relocating the alternator, once engine is all back in and hooked up Oil cooler is being replaced and moved into the left wheel arch, Full size race rad is in place.
I removed the slam panel to make space for the Full size rad already, so i need new mounts for the intercooler.
Im also going for a new manifold, possibly top mount.
Then it will need aero catches for the bonnet to close - Remap and then all done
Oh the gearbox is in, and geared to 201mph @ 9500rpm. Im hoping to get to 185+mph.
Overall the car should be more driveable, spool up alittle quicker, make more power, make more torque (the most important), higher top end.
Looking forward to getting started next weekend
Nice to see you're still making progress. (especially in the cooling department).Time to start making my 2012 changes on this car.
New clutch plates from clutch master, the others were far to aggressive on the road. These have arrived.
Brain crower stage 3 custom turbo camshafts, these arrive next week.
Engine is coming out, these parts are going in.
Making a few changes to the engine mounts, possibly relocating the alternator, once engine is all back in and hooked up Oil cooler is being replaced and moved into the left wheel arch, Full size race rad is in place.
I removed the slam panel to make space for the Full size rad already, so i need new mounts for the intercooler.
Im also going for a new manifold, possibly top mount.
Then it will need aero catches for the bonnet to close - Remap and then all done
Oh the gearbox is in, and geared to 201mph @ 9500rpm. Im hoping to get to 185+mph.
Overall the car should be more driveable, spool up alittle quicker, make more power, make more torque (the most important), higher top end.
Looking forward to getting started next weekend
Very curious to see where you're going to top out!
I also have my own turbo Honda project where I hopefully I will be able to create a readers cars thread about.
I boosted my JDM '00 S2000 Type V. Mase turbo kit with Borg warner S256 turbo.
Currently on 10psi making 430 bhp / 300lb/ft torque.
It's great fun as well Already did a autobahn run with a friend next to me.. going flat out and quite quickly reached 170mph. Did I say we had the roof down? lol
I think I was almost at the end of 6th gear with another 10mph left or so.
Good luck!
Jaaack said:
Anybody know what happened to this?
Good question. Life got busy so i didnt really touch the ATR for ages. Its just been in storage. I have just been to the Nurburgring in my brothers EK9 pretty stock clocking 8:55's by the 8th lap . It kinda got to pull my finger out and get back on the ATR.Ring Lap in stock EK9 - 1.6
http://www.youtube.com/watch?feature=player_embedd...
So the ATR, the following work has been done:
Alan @ Solid Fabrication's has done this:
Equal Length Twin Scroll Manifold
3" or 3.5" Downpipe (cant remember)
Twin Tial 38mm Wastegates
Twin Screamers, these will shoot up through the bonnet vent to atmosphere (space issue)
Custom Single Peice Intercooler Pipe Work (no more hoses blowing off)
EGT Bung into Manifold
Custom Front Engine Mount
Custom Turbo Brackets
Intercooler Mounted
Custom Full Size Rad Brackets (Slam Panel Removed)
Koyo Rad Inlet & OutLet's moved
No i need to relocate the battery to the boot, get rid of any wiring and bits not needed, bolt everything together and get her re-mapped.
Previously she ran 505hp / 370lbft @ 1.3bar. Im not really after anymore than 500, however the drive of the car should change alot, more lower down power/torque, more torque midrange, peak should be 400lbft no problem. Might put a 600hp map on there for fun.
But otherwise thats it, im hoping to get her down to Silverstone GP circuit for a track day, well more of shakedown in November, then i can get an idea of it will be a good track car, if thats the case, cage, serious weight reduction, handling, will be improved over the winter.
Cheers
Jay
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff