Rear Window Clip - Proposed Re-engineer & Manufacture
Discussion
da_murphster said:
Does the manufacturer know that people are having this problem with the holes not lining up?
Is anyone actually NOT having to either 'bodge' it or drill holes?
I assume that the car they used to design them may have been different to most (unsuprisingly!)
Mine fitted no problem at all. I used the screws rather than the bolts as I didnt want to start taking the trim off. Took five mins. Mine is an early 2000 model.Is anyone actually NOT having to either 'bodge' it or drill holes?
I assume that the car they used to design them may have been different to most (unsuprisingly!)
G
boardinscotland said:
da_murphster said:
Does the manufacturer know that people are having this problem with the holes not lining up?
Is anyone actually NOT having to either 'bodge' it or drill holes?
I assume that the car they used to design them may have been different to most (unsuprisingly!)
Mine fitted no problem at all. I used the screws rather than the bolts as I didnt want to start taking the trim off. Took five mins. Mine is an early 2000 model.Is anyone actually NOT having to either 'bodge' it or drill holes?
I assume that the car they used to design them may have been different to most (unsuprisingly!)
G
NCE 61 said:
boardinscotland said:
da_murphster said:
Does the manufacturer know that people are having this problem with the holes not lining up?
Is anyone actually NOT having to either 'bodge' it or drill holes?
I assume that the car they used to design them may have been different to most (unsuprisingly!)
Mine fitted no problem at all. I used the screws rather than the bolts as I didnt want to start taking the trim off. Took five mins. Mine is an early 2000 model.Is anyone actually NOT having to either 'bodge' it or drill holes?
I assume that the car they used to design them may have been different to most (unsuprisingly!)
G
da_murphster said:
NCE 61 said:
boardinscotland said:
da_murphster said:
Does the manufacturer know that people are having this problem with the holes not lining up?
Is anyone actually NOT having to either 'bodge' it or drill holes?
I assume that the car they used to design them may have been different to most (unsuprisingly!)
Mine fitted no problem at all. I used the screws rather than the bolts as I didnt want to start taking the trim off. Took five mins. Mine is an early 2000 model.Is anyone actually NOT having to either 'bodge' it or drill holes?
I assume that the car they used to design them may have been different to most (unsuprisingly!)
G
These are back in stock - very quick delivery.
Took an hour or so to fit (in the dark!) much better than the originals and peeling the boot carpet back to fit the bolts is no problem.
One side was perfect - the other side th eholes were low so the clip does not fit completely flat so I might need to elongate the hole (easy).
I find the rubber bits far to big to enable me to easily do up the screws - I will be fitting soft velco.
You can pinch up the screw by hand and then just quickly tighten with the allen key - not quite as easy as the self screw ones but worth it over the orginals for stability.
I'm sure that if you could source screws that was easy was to tighten without an allen key you could just swop them over - anyone know where to start looking?? - was thinking there must be something used on boats that would do it.
Took an hour or so to fit (in the dark!) much better than the originals and peeling the boot carpet back to fit the bolts is no problem.
One side was perfect - the other side th eholes were low so the clip does not fit completely flat so I might need to elongate the hole (easy).
I find the rubber bits far to big to enable me to easily do up the screws - I will be fitting soft velco.
You can pinch up the screw by hand and then just quickly tighten with the allen key - not quite as easy as the self screw ones but worth it over the orginals for stability.
I'm sure that if you could source screws that was easy was to tighten without an allen key you could just swop them over - anyone know where to start looking?? - was thinking there must be something used on boats that would do it.
Can anyone clarify what "hexagon ball driver" I need for this?
Earlier someone linked to this but their out of stock....
http://uk.rs-online.com/web/search/searchBrowseAct...
Am I searching for a BE8703?
This looks the same but has not got the same code - is it right?
http://cgi.ebay.co.uk/unior-ball-end-hex-key-drive...
Anyone point to where I can get one cheap?
Earlier someone linked to this but their out of stock....
http://uk.rs-online.com/web/search/searchBrowseAct...
Am I searching for a BE8703?
This looks the same but has not got the same code - is it right?
http://cgi.ebay.co.uk/unior-ball-end-hex-key-drive...
Anyone point to where I can get one cheap?
Edited by da_murphster on Sunday 11th October 16:49
da_murphster said:
Can anyone clarify what "hexagon ball driver" I need for this?
Earlier someone linked to this but their out of stock....
http://uk.rs-online.com/web/search/searchBrowseAct...
Am I searching for a BE8703?
This looks the same but has not got the same code - is it right?
http://cgi.ebay.co.uk/unior-ball-end-hex-key-drive...
Anyone point to where I can get one cheap?
It is only an allen key that can be operated on an angle. As long as you have the right size you should be ok. Pm coming about the box.Earlier someone linked to this but their out of stock....
http://uk.rs-online.com/web/search/searchBrowseAct...
Am I searching for a BE8703?
This looks the same but has not got the same code - is it right?
http://cgi.ebay.co.uk/unior-ball-end-hex-key-drive...
Anyone point to where I can get one cheap?
Edited by da_murphster on Sunday 11th October 16:49
da_murphster said:
Can anyone clarify what "hexagon ball driver" I need for this?
Earlier someone linked to this but their out of stock....
http://uk.rs-online.com/web/search/searchBrowseAct...
Am I searching for a BE8703?
This looks the same but has not got the same code - is it right?
http://cgi.ebay.co.uk/unior-ball-end-hex-key-drive...
Anyone point to where I can get one cheap?
The e-bay one looks like the correct item, just ensure it's a 3mm.Earlier someone linked to this but their out of stock....
http://uk.rs-online.com/web/search/searchBrowseAct...
Am I searching for a BE8703?
This looks the same but has not got the same code - is it right?
http://cgi.ebay.co.uk/unior-ball-end-hex-key-drive...
Anyone point to where I can get one cheap?
Edited by da_murphster on Sunday 11th October 16:49
Andy Pandie said:
da_murphster said:
Can anyone clarify what "hexagon ball driver" I need for this?
Earlier someone linked to this but their out of stock....
http://uk.rs-online.com/web/search/searchBrowseAct...
Am I searching for a BE8703?
This looks the same but has not got the same code - is it right?
http://cgi.ebay.co.uk/unior-ball-end-hex-key-drive...
Anyone point to where I can get one cheap?
The e-bay one looks like the correct item, just ensure it's a 3mm.Earlier someone linked to this but their out of stock....
http://uk.rs-online.com/web/search/searchBrowseAct...
Am I searching for a BE8703?
This looks the same but has not got the same code - is it right?
http://cgi.ebay.co.uk/unior-ball-end-hex-key-drive...
Anyone point to where I can get one cheap?
Edited by da_murphster on Sunday 11th October 16:49
Thanks
BDM said:
Do you literally pull the carpet back in the rearof the car and fit using the bolts???
Going to attempt to fit mine this weekend
I used the exsting self-tapping screws, had to elongate the holes in the new clips a bit as the originals were slightly wider. Didn't fancy ripping the carpet out both sides of the boot for four nuts and washers. Going to attempt to fit mine this weekend
Also made up an aluminium backing plate last night for the drivers side as the clip was a little tight so the centre screw only just met the threaded boss, just gave an extra couple of mil of freedom.
I've got some pics which I can post up later this evening when I get home.
Andy Pandie said:
BDM said:
Do you literally pull the carpet back in the rearof the car and fit using the bolts???
Going to attempt to fit mine this weekend
I used the exsting self-tapping screws, had to elongate the holes in the new clips a bit as the originals were slightly wider. Didn't fancy ripping the carpet out both sides of the boot for four nuts and washers. Going to attempt to fit mine this weekend
Also made up an aluminium backing plate last night for the drivers side as the clip was a little tight so the centre screw only just met the threaded boss, just gave an extra couple of mil of freedom.
I've got some pics which I can post up later this evening when I get home.
What are the clear sticky bits for that you get with them?
As promised,
Using the existing screws,
Showing the additional ally plate/spacer between the clip and body (not fully screwed home),
In the closed position,
Using the existing screws,
Showing the additional ally plate/spacer between the clip and body (not fully screwed home),
In the closed position,
BDM said:
What are the clear sticky bits for that you get with them?
To go between the clip and the rear screen, can just been seen on the inner face in the first two pictures, better than bare aluminium straight onto plastic.It really is very easy to pull back the carpet in the boot to fit the bolts and well worth it over self tappers for security. You can not see the bit you pull back so no real need to reglue perfectly etc. Once you remove the old clip its all obvious really. I did it by headtorch in the rain in an hour!
I will also be looking to make some type of plate to bring out the lock as I am struggling to get initial purchase on the screw - works for now but will do later.
Also took the opportunity to put 'leading edge' tape on the screen where it catches the boot, reglued rubber seal and silicne sprayed everywhere.
For the first time in my ownership I have a non sticky, secure, non squeaky window - bliss.
Just about 20 other niggles ot sort now.
I will also be looking to make some type of plate to bring out the lock as I am struggling to get initial purchase on the screw - works for now but will do later.
Also took the opportunity to put 'leading edge' tape on the screen where it catches the boot, reglued rubber seal and silicne sprayed everywhere.
For the first time in my ownership I have a non sticky, secure, non squeaky window - bliss.
Just about 20 other niggles ot sort now.
Gassing Station | Tuscan | Top of Page | What's New | My Stuff