Rear indicator lights
Discussion
jasutton85 said:
Unless I am completely missing it, there are no screws I can see that fix the led board to the housing
Mine did not have any screws fixing it into the housing. It became a nuisance when they started to fall out, I tried silicone but it was not very successful. I eventually managed to obtain a pair with the screw fitting from a very nice fellow Tuscan owner to resolve the issue. I had never seen another without the screw fitting, the guys at Surface & design said they did not know of any that did not have the screw fitting??. You will need to get the mounting pod as well as the indicators. Good luck, maybe the scrappies will have a pair for reasonable money.
Thought it might have been some bright spark at TVR considering them "maintenance-free" and bonding them in with something lying around the factory.
Wheeler probably had a small batch made in India that came back without holes
You may get away with your current pods if you can source a couple of replacement lights. The area the self tappers go into is very thin walled and on mine it had broken through. I simply whittled a curved piece of wood and araldited it in. Screw now holds, you should be able to do the same.
Wheeler probably had a small batch made in India that came back without holes
You may get away with your current pods if you can source a couple of replacement lights. The area the self tappers go into is very thin walled and on mine it had broken through. I simply whittled a curved piece of wood and araldited it in. Screw now holds, you should be able to do the same.
Gassing Station | Tuscan | Top of Page | What's New | My Stuff