Discussion
Not in stock and unknown if it will be back In.
EBay offerings seem to be limited to either heated with a wide angle panel or plain unheated glass.
I wasnt aware but there are some alternatives of adhesive backed reflective plastic instead of glass to stick over the old glass, not ideal but could be a short term solution. Otherwise Nicks suggestion above may be needed.
EBay offerings seem to be limited to either heated with a wide angle panel or plain unheated glass.
I wasnt aware but there are some alternatives of adhesive backed reflective plastic instead of glass to stick over the old glass, not ideal but could be a short term solution. Otherwise Nicks suggestion above may be needed.
Thanks for the offer philpot but the one I'm replacing is in pretty much the same state as yours. The heating element does get used but mainly for clearing condensation rather than ice and is pretty effective.
The link you attached is the one I found last night and have gone for as it doesn't have the wide angle lens. I find the existing mirror gives excellent visibility and wanted the same but couldn't find. I understand convex and concave but struggling with the description 'spherical' and 'aspherical'. Gone for spherical and hope if doesn't look too much like a bullseye window!
It seems others are struggling to find a replacement too so will report back.
The link you attached is the one I found last night and have gone for as it doesn't have the wide angle lens. I find the existing mirror gives excellent visibility and wanted the same but couldn't find. I understand convex and concave but struggling with the description 'spherical' and 'aspherical'. Gone for spherical and hope if doesn't look too much like a bullseye window!
It seems others are struggling to find a replacement too so will report back.
Sorry the second photo didn't upload for some reason. Above taken as near as possible from the the same angle.
Sagi Badger I had to put the glass back in when it was knocked out once and it just clipped in. It was hit hard from the rear 3/4 by a football and I was relieved nothing actually broke. So guess the mounting/motor assembly are pretty strong. My car is going in for a major service and good going over next week so I've decided to leave the removal to them hence the temp cable tie!
Incidentally would like to see your c/f replacements, any pictures? I saw some on a Corrado forum while searching for glass but the price was
Gassing Station | Tuscan | Top of Page | What's New | My Stuff