How to change a clutch on a Cerbera

[mad mark]

Ok, so this is how I do it, I'm sure others will say something different.
The bolt sizes are whats on my car, no guarantee they are the same on all, And the torque settings are from the AJP8 rebuild manual.

Replacing the Clutch

Hope it helps.

Edited because the original link has now been changed to the Clever Trevor web site.

Edited by Mad Mark on Saturday 11th August 13:13

[mark.rowe]

Exellent info there!

I got mine done recently as i didn't have the bottle to do it myself.
Doesn't look such a bad a job there.

Was that on a 4 poster or pit?

[hbeck]

Bloody hell! great job on the write up....

You could get a job with Haynes!

[HarryW]

Filed for future reference, cheers

[alinton]

You forgot to use the immortal Haynes phrase: "Refitting is the reverse of removal" !

Well done however, I hate that phrase!

Andy.

[mad mark]

alinton said:

You forgot to use the immortal Haynes phrase: "Refitting is the reverse of removal" !

Well done however, I hate that phrase!

Andy.

And "apply slight pressure" which translated means "its f@cking stiff so push hard"

Thanks for the comments guys, I just hope i dont get Austecs, Trackcar or Levens sending me nasty Emails for loosing them business

[Extra 300 Driver]

Nice one. I always too my gearbox out and changed the oil too. Remember if you are changine the slave you need to put the ports at the 6.30 position otherwise you will never remove all the air from the system.

[Julian64]

Good post, we need more posts like this on the site

[cossiemetro]

excellent post mark

[keithyboy]

Good job matey. Filed for the future.

[mad mark]

Extra 300 Driver said:

Nice one. I always too my gearbox out and changed the oil too. Remember if you are changine the slave you need to put the ports at the 6.30 position otherwise you will never remove all the air from the system.

As Nick says, there are 2 ports they should be positioned at the top and bottom to allow air to bleed out.
Here's a pic showing the port holes (This is NOT the Clever Trevor slave)

[David H]

Not a Cerbie owner, but great post

[gazzab]

Great post !!!

[david smith]

nice one mark ... luchy you didnt pull the rear view mirror off when attaching the gearstick to it! (call me paranoid!)

DAS

[mrsmadmark]

mark.rowe said:

Exellent info there!

Was that on a 4 poster or pit?

we've got a pit in the garage and Mark also has a helping hand, our 6yr old daughter

[BLUETHUNDER]

Ive tried down loading this and all i get is a blank screen.What am i doing wrong?

[Julian64]

mrsmadmark said:

mark.rowe said:

Exellent info there!

Was that on a 4 poster or pit?

we've got a pit in the garage and Mark also has a helping hand, our 6yr old daughter

Just don't do what one of my patients did, which was to weld his fuel tank while standing in a pit with the car overhead

[BLUETHUNDER]

You are joking arent you????????????????????

[mad mark]

BLUETHUNDER said:

Ive tried down loading this and all i get is a blank screen.What am i doing wrong?

Try saving it to disk, If you have problems i'll mail it to you. It's a word document 431kb.

[betty_swallocks]

Julian64 said:

mrsmadmark said:

mark.rowe said:

Exellent info there!

Was that on a 4 poster or pit?

we've got a pit in the garage and Mark also has a helping hand, our 6yr old daughter

Just don't do what one of my patients did, which was to weld his fuel tank while standing in a pit with the car overhead

You must be a Psychiatrist