TVR Cerbera Heater Control ECU Terminations.
Discussion
Hi was wondering if anyone could, i remove my Heater control unit so it could be repaired and like a total tool I did not note which connector goes where i.e top or bottom as both the connectors are identical. i also dont know what way round the ribbon cable goes in. i have tried looking for drawings but found that the electrical drawings are not very clear. Could anyone help me by taking a picture of their Connector Blocks and ribbon cable going into the Heater Control ECU please as that would really help.
Where is it in the car, boot or passenger footwell?
I've some picture of my some of my boxes here...
http://www.pbase.com/byker28i/tvr&page=all
I've some picture of my some of my boxes here...
http://www.pbase.com/byker28i/tvr&page=all
Edited by Byker28i on Wednesday 24th September 20:05
Hello,
I'm now trying to diagnose my absolutely non working ventilation... The ribbon cable seems damaged, and one of the pins of the panel was bent, leading me to think that the whole stuff has ben unplugged may have been plugged back improperly.
Do someone know how to plug the ribbon cable properly to the control panel?
Thanks a lot!
Julien
I'm now trying to diagnose my absolutely non working ventilation... The ribbon cable seems damaged, and one of the pins of the panel was bent, leading me to think that the whole stuff has ben unplugged may have been plugged back improperly.
Do someone know how to plug the ribbon cable properly to the control panel?
Thanks a lot!
Julien
Twinkam said:
Thread Hijack alert!
I find the blue LED very dim compared to the red one, can't see it all all in daylight; can anyone suggest a suitable replacement?
There's a description in this thread: http://www.pistonheads.com/gassing/topic.asp?h=0&a...I find the blue LED very dim compared to the red one, can't see it all all in daylight; can anyone suggest a suitable replacement?
FarmyardPants said:
Twinkam said:
Thread Hijack alert!
I find the blue LED very dim compared to the red one, can't see it all all in daylight; can anyone suggest a suitable replacement?
There's a description in this thread: http://www.pistonheads.com/gassing/topic.asp?h=0&a...I find the blue LED very dim compared to the red one, can't see it all all in daylight; can anyone suggest a suitable replacement?
Gassing Station | Cerbera | Top of Page | What's New | My Stuff