Ticking grooved rear discs
Discussion
I got those grooved from the group buy on here a few years ago, but have only just actually managed to try them out recently. I rebuilt the callipers also so they shouldn't be sticking & have new pads, but I can hear a road speed related ticking that goes away if I gently apply the brakes. I gave the brakes a proper workout the other day & the noise was awful after coming off the pedal for a second or so then seemed a little better after that.
Did anyone else find this problem with them?
The fronts are grooved too, but they have been for years & cause no problems.
Did anyone else find this problem with them?
The fronts are grooved too, but they have been for years & cause no problems.
I think if you read the link post all your problem,s will disappear..
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
I had a similar problem. All ok now after fitting the anti rattle plates...
The answer is towards the bottom of the thread...
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
I had a similar problem. All ok now after fitting the anti rattle plates...
The answer is towards the bottom of the thread...
Edited by TailEndCharlie on Sunday 5th July 16:52
TailEndCharlie said:
I think if you read the link post all your problem,s will disappear..
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
I had a similar problem. All ok now after fitting the anti rattle plates...
The answer is towards the bottom of the thread...
That sounds perfect, thanks very much http://www.pistonheads.com/gassing/topic.asp?h=0&a...
I had a similar problem. All ok now after fitting the anti rattle plates...
The answer is towards the bottom of the thread...
Edited by TailEndCharlie on Sunday 5th July 16:52
Gassing Station | Cerbera | Top of Page | What's New | My Stuff