Cerbera clutch plate thickness
Discussion
I am getting closer to the point where I attach the gearbox to the motor on my 4.5 Cerb. I have measured the clutch plate thickness at 17mm. With a new clutch being near 900 pound I was wondering if anyone can tell me how much life is left in the clutch I have? It wasn't slipping when it was running.
Luckyone said:
I saved this screen grab from FB a while ago to answer that question, ignore the wear rates they are referring to the plate in question from that post.
![](https://i.imgur.com/VtlOMdi.jpeg)
That’s from 5 years ago so no idea if he still offers the service but the measurements should still be good.
You may want to double check your measurements though![wink](/inc/images/wink.gif)
I guess those numbers refer to the thickness of the friction material not the overall plate thickness. I will have to check that measurement when I am home next, and see if anywhere local can "re coat" the discs.![](https://i.imgur.com/VtlOMdi.jpeg)
That’s from 5 years ago so no idea if he still offers the service but the measurements should still be good.
You may want to double check your measurements though
![wink](/inc/images/wink.gif)
Gassing Station | Cerbera | Top of Page | What's New | My Stuff