Custom Turbo Builder
Discussion
nick_968 said:
Are there any turbo builders in the UK that will build a one off turbo i.e. mixing and matching components on a garrett CHRA so it remains bolt on but you can use more advanced turbine and compressor wheels?
Why bother when there are so many turbo options off the shelf ?Although pretty much any turbo specialist should be able to do what you want ?
Exactly what do you have, and are trying to achieve ?
Needs to work within a T03/T04e frame and the replica KKK turbine housing. It is already a hybrid of sorts but the turbine wheel is too restrictive. I want to machine the turbine housing and fit a stage 5 (t350) wheel or similar but most people are only interested in selling off the shelf kit that I have come across so you are limited by the compressor & turbine pairings. For example the t350 wheel seems to come paired with the 61mm compressor wheel which is the well known Garrett Stage V turbo but I would like to run it with a smaller comp wheel. Holset have some nice stuff but I wold have to play around with it quite a bit to make it all bolt up. Current turbo is a T03/T04e 60 trim compressor with a t31 (Stage 3) turbine wheel. I think the turbine wheel is holding back the top end.
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff