Ford Fiesta - Half of expension tank cap stuck in tank
Discussion
Removed the expansion tank cap on lady Targ's 2010 Fiesta and the cap came apart with half of it stuck in place in the tank. I managed to rotate the remaining part a bit with some pliers but it won't come out (snapped a few bits off in the process). Any suggestions? I bought a new cap and the piece that is stuck in there is just held in with a rubber 'o' ring type seal - the cap part is what screws down on the thread. The pressure valve is still fine, put the cap back on and drives with no issues, its just that the expansion water has dropped a smidge and I'd like to fix this before I 'have to' IYSWIM.
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff