80mm throttle body
Discussion
I need a 80mm TB as I have just odered a new inlet manifold from USA the is supposed to come with a 80mm TB. But it is a drive by wire one which is no good as I hane a throttle cable.
The manifold has a 80mm x 80mm opening designed for 80mm TB. I thought if I attached my orignal TB to this manifold (which is 70mm i think) I thought I would be strangling power.
I have 3" pipe work from the charge cooler at the moment but I plan on moving the postion of the c/cooler so the pipe work run will be very short and get some 80mm pipe work made up.
The manifold has a 80mm x 80mm opening designed for 80mm TB. I thought if I attached my orignal TB to this manifold (which is 70mm i think) I thought I would be strangling power.
I have 3" pipe work from the charge cooler at the moment but I plan on moving the postion of the c/cooler so the pipe work run will be very short and get some 80mm pipe work made up.
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff