Wide Angle Drivers Mirrors
Discussion
[quote=the_ferret82]People interested in a Wide Angle Monaro drivers Mirror (#92147343)
The_Ferret82............Details......Paid
gsd2000.................Details......Paid
JAG-R8 x2...............Details......Paid
Tempy...................Details......Paid
007 VXR.................Details
Glyn84..................Details......Paid
Ciscas..................Details......Paid.......Collected
maxmc2..................Details......Paid
V88Dicky
ksithumper
People interested in a Wide Angle VXR8 drivers Mirror (#92214580)
Magic919................Details......Paid
stevemj.................Details......Paid.......Collected
themightyshwa...........Details......Paid
Noose...................Details
darren_r1...............Details......Paid
Andy Sargeant...........Details
mogv8...................Details......Paid
Phantom Mark
paulg390................Details......Paid
Sloooooow...............Details......Paid
V10JRR..................Details......Paid
The_Ferret82............Details......Paid
gsd2000.................Details......Paid
JAG-R8 x2...............Details......Paid
Tempy...................Details......Paid
007 VXR.................Details
Glyn84..................Details......Paid
Ciscas..................Details......Paid.......Collected
maxmc2..................Details......Paid
V88Dicky
ksithumper
People interested in a Wide Angle VXR8 drivers Mirror (#92214580)
Magic919................Details......Paid
stevemj.................Details......Paid.......Collected
themightyshwa...........Details......Paid
Noose...................Details
darren_r1...............Details......Paid
Andy Sargeant...........Details
mogv8...................Details......Paid
Phantom Mark
paulg390................Details......Paid
Sloooooow...............Details......Paid
V10JRR..................Details......Paid
I tried fitting mine this morning (VXR8) with some difficulty; in fact I've given up for now to get advice from others here.
I managed to get a screwdriver into the release hole and loosen the top left corner. But something is holding back the opposite corner of the mirror. Heaved and wiggled (the mirror too) but no release. So I've left it for now as I was concerned about breaking something.
I would advise to put some tape to protect the plastic surround from the screwdriver.
I've got some photos as I thought they might help others. As it seems I'm the one who needs help I'll not post yet.
Steve
I managed to get a screwdriver into the release hole and loosen the top left corner. But something is holding back the opposite corner of the mirror. Heaved and wiggled (the mirror too) but no release. So I've left it for now as I was concerned about breaking something.
I would advise to put some tape to protect the plastic surround from the screwdriver.
I've got some photos as I thought they might help others. As it seems I'm the one who needs help I'll not post yet.
Steve
Edited by stevemj on Saturday 26th September 12:08
Inspired by Magic 919's photo - I had another go - still struggling :-(
stevemj said:
I tried fitting mine this morning (VXR8) with some difficulty; in fact I've given up for now to get advice from others here.
I managed to get a screwdriver into the release hole and loosen the top left corner. But something is holding back the opposite corner of the mirror. Heaved and wiggled (the mirror too) but no release. So I've left it for now as I was concerned about breaking something.
I would advise to put some tape to protect the plastic surround from the screwdriver.
I've got some photos as I thought they might help others. As it seems I'm the one who needs help I'll not post yet.
Steve
I managed to get a screwdriver into the release hole and loosen the top left corner. But something is holding back the opposite corner of the mirror. Heaved and wiggled (the mirror too) but no release. So I've left it for now as I was concerned about breaking something.
I would advise to put some tape to protect the plastic surround from the screwdriver.
I've got some photos as I thought they might help others. As it seems I'm the one who needs help I'll not post yet.
Steve
Edited by stevemj on Saturday 26th September 12:08
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff