So, what's that unholy Alex upto this year with his Sag...
Discussion
Body work now done and painted. When all CF bits fitted, I'll post pics. Otherwise vids of work done so far available on my YouTube channel.
https://www.youtube.com/user/Alex255Gray/videos
Very pleased with the redesign of the light cluster and the side AM style vents, works very well with Sag body IMHO.
Quite a few people have seen the work so far and the general opinion is positive.
https://www.youtube.com/user/Alex255Gray/videos
Very pleased with the redesign of the light cluster and the side AM style vents, works very well with Sag body IMHO.
Quite a few people have seen the work so far and the general opinion is positive.
Edited by alex_gray255 on Saturday 24th January 09:07
Not the greatest pictures (iPhone), but here are some photos of the Sag being painted.
https://www.youtube.com/watch?v=6-dgAMxYdXM
https://www.youtube.com/watch?v=6-dgAMxYdXM
The binnacle is more or less the same as it was, just a few mm wider.
I understand the comment about the column surround however. It is now much... hasher. Some
colour co-ordination changes are also needed to make it go better with the steering wheel.
It is one of those areas I want to live with for a bit and then see how I feel with it.
I understand the comment about the column surround however. It is now much... hasher. Some
colour co-ordination changes are also needed to make it go better with the steering wheel.
It is one of those areas I want to live with for a bit and then see how I feel with it.
BuzzBillsberry said:
I always look forward to your posts especially at the moment with all the carbon bling love the binnacle, clock surround and the airbox.... I'll have these if you go into production with them. Altho' iirc I think the airbox is done by someone else. Apologies if I'm repeating myself...regards wanting the products I'm not sure if you've answered my requests I've sort of been on and been off here sporadically over the summer
Buzz
Hi Buzz, if you are going to Millbrook on Sunday visit the stand with my car on display and you should be able to order some of the CF stuff there or at least see what is possible. Not all of the stuff done for my car will be orderable, but things like the airbox, the sharks teeth/splitter, console surround and binnacle (possibly) will be. The binnacle may not be as it is a different spec from the normal one as I am working on using that to house the gear change LEDs concept that I first looked at 2+ years ago.Buzz
The steering surround CF also needs a few little tweaks till fully happy with it.
^^ As mentioned above, car will be on display Sunday as a demo'er to show the products designed and available.
The ones like the bonnet and side-bars will not be on offer as they were one-offs based on design ideas
that aren't going to be repeated. Although, the normal one-piece bonnet conversion certainly is.
Also...
If those who were interested in this thread...
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
...could still indicate if they are interested or not, would be most helpful.
I'm going to be working with a couple of folks to get it implemented in the next month or so. Unfortunately, Paul pulled out of the project
so I've had to source other electrics people to finish it off.
The ones like the bonnet and side-bars will not be on offer as they were one-offs based on design ideas
that aren't going to be repeated. Although, the normal one-piece bonnet conversion certainly is.
Also...
If those who were interested in this thread...
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
...could still indicate if they are interested or not, would be most helpful.
I'm going to be working with a couple of folks to get it implemented in the next month or so. Unfortunately, Paul pulled out of the project
so I've had to source other electrics people to finish it off.
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff