Discussion
Andy135 said:
Nice discovery. Curious to hear how it works when running.
What ID were the cams, out of interest? Any identifying numbers?
Getting 58mm Billet throttle body tomorrow so making progress.What ID were the cams, out of interest? Any identifying numbers?
Cams had Cat 150hp stamped on the end. When I contacted piper about them He wouldn't give me any information about them as they were made under license for Caterham. Caterham gave me lift and timings.
Eccles52 said:
How's this project progressing? Very interested to hear how you're getting on 
Hi Thanks for the interest. Car is all back together and running. Had to alter coolant hose to other side of engine. Also had to change TPS for anti clockwise one. So just need to get it mapped now. But seems to drive okay. Plugs and exhaust look a reasonable colour. Bottom end pull seems better



Eccles52 said:
Nice work, that's a tidy install!
Did you have the 140 spec originally? I have the 150 so already have the cams but ITBs so it would be great to see the figures after mapping and how it compares, although I do still have the std mapping.
Thanks very much. To be honest Im not fully sure on the spec as it didn't come with much history. When i took the rocker cover off it had 150 stamped on the end of the cams. Apparently piper cams made under license for Caterham. Mapping is the next jobDid you have the 140 spec originally? I have the 150 so already have the cams but ITBs so it would be great to see the figures after mapping and how it compares, although I do still have the std mapping.
Gassing Station | Caterham | Top of Page | What's New | My Stuff